IC697MDL671 - In Stock | GE Fanuc - GE IP - Emerson Series 90-70

IC697MDL671

IC697MDL671

Revisions: B C D 
Description:

The IC697MDL671 module is an accessory part from Series 90-70 by GE Fanuc. This interrupt input module operates on 24 Volts DC voltage and it features 16 inputs in 4 groups of 4 each. The unit has an input current of 10 milliAmps and an isolation voltage of 1500 Volts.

Rated 4.8 with 15 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

In Stock Ships Today

Submit RFQ for IC697MDL671

Add more parts to quote

Description:

The IC697MDL671 module is an accessory part from Series 90-70 by GE Fanuc. This interrupt input module operates on 24 Volts DC voltage and it features 16 inputs in 4 groups of 4 each. The unit has an input current of 10 milliAmps and an isolation voltage of 1500 Volts.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: B C D 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC697MDL671.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 15 reviews

    Technical Specifications for IC697MDL671

BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697MDL671
Rated voltage24 Volts DC
Input current10 milliAmps
Input voltage range-3 to 30 Volts DC
Required current0.3 Amps
Number of inputs per module16
Isolation voltage1500 Volts
ON-state voltage13.5 to 30 Volts
OFF-state voltage-3 to 5 Volts (positive), -5 to 30 Volts (negative)
ON-state current6 to 15 milliAmps
OFF-state current0 to 2 milliAmps
BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697MDL671
Rated voltage24 Volts DC
Input current10 milliAmps
Input voltage range-3 to 30 Volts DC
Required current0.3 Amps
Number of inputs per module16
Isolation voltage1500 Volts
ON-state voltage13.5 to 30 Volts
OFF-state voltage-3 to 5 Volts (positive), -5 to 30 Volts (negative)
ON-state current6 to 15 milliAmps
OFF-state current0 to 2 milliAmps
s

About IC697MDL671

The GE Fanuc interrupt input module that is known as the IC697MDL671 input module is listed in GE Series 90-70 and it is an accessory component that can contribute to more efficient system operation. The IC697MDL671 interrupt input module is built for operation at the desired interrupt rate and it has a variety of features, including operation with components such as switches with proximity sensors, space to install an input filter, functionality with either positive or negative logic, pushbutton support, and independent operation. The IC697MDL671 input module is protected with a dedicated key that helps to avoid the incorrect installation of the module.



 



The IC697MDL671 interrupt input module is intended to be used with systems operating on DC power and it offers 16 inputs that can be incorporated for various applications. The inputs are categorized in 4 groups. The individual points are marked with letter-number codes from A1 to D4. It should be noted that the last 2 inputs in the last input group are meant to be used for configuration purposes. The IC697MDL671 interrupt input module operates on voltage of 24 Volts DC and its isolation voltage rating is 1500 Volts. The voltage range of the module when the module is powered on is 13.5 to 30 Volts. The opposite voltage range (off-state) is -3 to 5 Volts for positive logic and -5 to 30 Volts for negative logic. In addition to that, the current rating for the module when it is turned on is 6 to 15 milliAmps and the current rating when the module is turned off is 0 to 2 milliAmps.



Repair Services for IC697MDL671

Type Lead Time Price Action
Repair Service 2-4 weeks $556cartAdd to Cart

Our highly skilled technicians can repair your IC697MDL671. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC697MDL671

Please refer to the manual for more information about the IC697MDL671 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697MDL671B
IC697MDL671-B, Series B, Rev B Request Quote
IC697MDL671C
IC697MDL671-C, Series C, Rev C Request Quote
IC697MDL671D
IC697MDL671-D, Series D, Rev D Request Quote
Common misspellings:
  • 1C697MDL671
  • IC697MD1671
  • IC697MDL67l
  • IC697MDL671

Dimensions For IC697MDL671

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC697MDL671

Resolutions For IC697MDL671

About

Technical Specifications for IC697MDL671

BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697MDL671
Rated voltage24 Volts DC
Input current10 milliAmps
Input voltage range-3 to 30 Volts DC
Required current0.3 Amps
Number of inputs per module16
Isolation voltage1500 Volts
ON-state voltage13.5 to 30 Volts
OFF-state voltage-3 to 5 Volts (positive), -5 to 30 Volts (negative)
ON-state current6 to 15 milliAmps
OFF-state current0 to 2 milliAmps
BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697MDL671
Rated voltage24 Volts DC
Input current10 milliAmps
Input voltage range-3 to 30 Volts DC
Required current0.3 Amps
Number of inputs per module16
Isolation voltage1500 Volts
ON-state voltage13.5 to 30 Volts
OFF-state voltage-3 to 5 Volts (positive), -5 to 30 Volts (negative)
ON-state current6 to 15 milliAmps
OFF-state current0 to 2 milliAmps

About IC697MDL671

The GE Fanuc interrupt input module that is known as the IC697MDL671 input module is listed in GE Series 90-70 and it is an accessory component that can contribute to more efficient system operation. The IC697MDL671 interrupt input module is built for operation at the desired interrupt rate and it has a variety of features, including operation with components such as switches with proximity sensors, space to install an input filter, functionality with either positive or negative logic, pushbutton support, and independent operation. The IC697MDL671 input module is protected with a dedicated key that helps to avoid the incorrect installation of the module.



 



The IC697MDL671 interrupt input module is intended to be used with systems operating on DC power and it offers 16 inputs that can be incorporated for various applications. The inputs are categorized in 4 groups. The individual points are marked with letter-number codes from A1 to D4. It should be noted that the last 2 inputs in the last input group are meant to be used for configuration purposes. The IC697MDL671 interrupt input module operates on voltage of 24 Volts DC and its isolation voltage rating is 1500 Volts. The voltage range of the module when the module is powered on is 13.5 to 30 Volts. The opposite voltage range (off-state) is -3 to 5 Volts for positive logic and -5 to 30 Volts for negative logic. In addition to that, the current rating for the module when it is turned on is 6 to 15 milliAmps and the current rating when the module is turned off is 0 to 2 milliAmps.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $556cartAdd to Cart

Our highly skilled technicians can repair your IC697MDL671. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $556cartAdd to Cart

Our highly skilled technicians can repair your IC697MDL671. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC697MDL671 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697MDL671B
IC697MDL671/B, Series B, Rev B Request Quote
IC697MDL671C
IC697MDL671/C, Series C, Rev C Request Quote
IC697MDL671D
IC697MDL671/D, Series D, Rev D Request Quote

Common misspellings:
  • IC697MD1671
  • IC697MDL67l
  • IC697MDL671
PDF