IC697MEM713 - In Stock | GE Fanuc - GE IP - Emerson Series 90-70

IC697MEM713

Rated 4.7 with 15 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC697MEM713

Revisions: A B C 
Description: The IC697MEM713 module is a programmable coprocessor module manufactured by GE Fanuc Automation. The module is classified under the Series 90-70 of the GE programmable coprocessor modules.
In Stock Ships Today
Request a quote for IC697MEM713

Description:

The IC697MEM713 module is a programmable coprocessor module manufactured by GE Fanuc Automation. The module is classified under the Series 90-70 of the GE programmable coprocessor modules.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: A B C 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC697MEM713.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 15 reviews

    Technical Specifications for IC697MEM713

BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697MEM713
Communication Two RS-422/RS-485 or RS-232 serial ports
Status Indication Three LED ports
Programming and Configuration IC647 or IC640 computer, or IBM-compatible PC
Current required from 5V bus1.0 Amp
VMESystem designed to support the VME standard C.1
Error checking CPU checksum routine
MegaBasicSupported
BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697MEM713
Communication Two RS-422/RS-485 or RS-232 serial ports
Status Indication Three LED ports
Programming and Configuration IC647 or IC640 computer, or IBM-compatible PC
Current required from 5V bus1.0 Amp
VMESystem designed to support the VME standard C.1
Error checking CPU checksum routine
MegaBasicSupported
s

About IC697MEM713

The GE Fanuc IC697MEM713 programmable coprocessor module is a high-performance microcomputer that has been designed to perform coprocessor functions and it combines the functions of the communications module and the ASCII module or Basic module. The IC697MEM713 module is made for the Series 90-70 GE Fanuc PLC. It is configured to function with 1 or 2 independent CCM ports or with just a single serial port. The IC697MEM713 module is a programmable coprocessor module and it can be programmed by using a powerful BASIC language known as the MegaBasic. This programming language effectively performs data acquisition, ensures effective data storage, and carries out the function of data retrieval while ensuring real-time computing.



 



The IC697MEM713 module features a Restart or Reset pushbutton that is used to place the module in "RUN Mode" or the "PROGRAM Mode." Note that pressing the Restart/Reset pushbutton for less than 5 seconds puts the IC697MEM713 module in the "RUN mode." This is referred to as a soft reset.  Pressing the Restart/Reset pushbutton for more than 10 seconds makes the PCM enter the "PROGRAM DEVELOPMENT mode." The IC697MEM713 module features up to 3 LED indicators that are found on the top and front of the PCM. The first LED indicator shows the "OFF state," which means that the IC697MEM713 module is not functioning. This can occur in case of hardware malfunctioning. The second LED shows the "ON state," and the LED glows steadily unless there is a problem. The last LED flashes whenever there is a power-up diagnostics process taking place.



Repair Services for IC697MEM713

Type Lead Time Price Action
Repair Service 2-4 weeks $156cartAdd to Cart

Our highly skilled technicians can repair your IC697MEM713. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC697MEM713

Please refer to the manual for more information about the IC697MEM713 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697MEM713A
IC697MEM713-A, Series A, Rev A Request Quote
IC697MEM713B
IC697MEM713-B, Series B, Rev B Request Quote
IC697MEM713C
IC697MEM713-C, Series C, Rev C Request Quote
Common misspellings:
  • 1C697MEM713
  • IC697MEM7l3
  • IC697MEM713

Dimensions For IC697MEM713

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC697MEM713

Resolutions For IC697MEM713

About

Technical Specifications for IC697MEM713

BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697MEM713
Communication Two RS-422/RS-485 or RS-232 serial ports
Status Indication Three LED ports
Programming and Configuration IC647 or IC640 computer, or IBM-compatible PC
Current required from 5V bus1.0 Amp
VMESystem designed to support the VME standard C.1
Error checking CPU checksum routine
MegaBasicSupported
BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697MEM713
Communication Two RS-422/RS-485 or RS-232 serial ports
Status Indication Three LED ports
Programming and Configuration IC647 or IC640 computer, or IBM-compatible PC
Current required from 5V bus1.0 Amp
VMESystem designed to support the VME standard C.1
Error checking CPU checksum routine
MegaBasicSupported

About IC697MEM713

The GE Fanuc IC697MEM713 programmable coprocessor module is a high-performance microcomputer that has been designed to perform coprocessor functions and it combines the functions of the communications module and the ASCII module or Basic module. The IC697MEM713 module is made for the Series 90-70 GE Fanuc PLC. It is configured to function with 1 or 2 independent CCM ports or with just a single serial port. The IC697MEM713 module is a programmable coprocessor module and it can be programmed by using a powerful BASIC language known as the MegaBasic. This programming language effectively performs data acquisition, ensures effective data storage, and carries out the function of data retrieval while ensuring real-time computing.



 



The IC697MEM713 module features a Restart or Reset pushbutton that is used to place the module in "RUN Mode" or the "PROGRAM Mode." Note that pressing the Restart/Reset pushbutton for less than 5 seconds puts the IC697MEM713 module in the "RUN mode." This is referred to as a soft reset.  Pressing the Restart/Reset pushbutton for more than 10 seconds makes the PCM enter the "PROGRAM DEVELOPMENT mode." The IC697MEM713 module features up to 3 LED indicators that are found on the top and front of the PCM. The first LED indicator shows the "OFF state," which means that the IC697MEM713 module is not functioning. This can occur in case of hardware malfunctioning. The second LED shows the "ON state," and the LED glows steadily unless there is a problem. The last LED flashes whenever there is a power-up diagnostics process taking place.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $156cartAdd to Cart

Our highly skilled technicians can repair your IC697MEM713. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $156cartAdd to Cart

Our highly skilled technicians can repair your IC697MEM713. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC697MEM713 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697MEM713A
IC697MEM713/A, Series A, Rev A Request Quote
IC697MEM713B
IC697MEM713/B, Series B, Rev B Request Quote
IC697MEM713C
IC697MEM713/C, Series C, Rev C Request Quote

Common misspellings:
  • IC697MEM7l3
  • IC697MEM713
PDF