Product image is representative; revision or series may vary. Contact us to request a specific version.
IC697PWR711
The GE Fanuc IC697PWR711 is a Power Supply module that is part of the GE Fanuc Series 90-30 platform. This power supply is used can be used to power One (1) or Two (2) racks. It may be configured for 120VAC / 240VAC input dictated by the jumper setting. It has +5VDC and +/-12VDC outputs with load capacity of 100 Watts, maximum.
-
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for IC697PWR711
| Manufacturer | GE Fanuc Emerson |
|---|---|
| Product Type | Power Supply Module |
| Product Line | Series 90-70 |
| Part Number | IC697PWR711 |
| Weight | 3.63 lbs (1.64 kg) |
| Series | 90-30 PLC |
| Nominal rated voltage | 120/240 VAC |
| Input Power | 160 watts maximum at full load |
| Load Capacity | 100 Watts |
| No. of Outputs | Three (3) |
| Output Voltage | +5 VDC: 4.90 to 5.25 volts (5.07 volts nominal) +12 VDC: 11.75 to 12.6 volts ' -12 VDC: -12.6 to -11.75 volts |
| Input Voltage Range, AC | 90-132 VAC / 180-264 VAC |
| Input Frequency Range | 47-63 Hz |
| Input Half Cycle Peak Inrush | 55 amps (typical), 77 amps (maximum) |
| Overvoltage Limit | +5 VDC Output: 5.7 to 6.7 volts |
| Overcurrent limit | +5 VDC output: 26 amp, maximum +12 VDC output: 4 amp, maximum -12 VDC output: 2 amp, maximum |
| Holdup Time | 21 milliseconds minimum |
| Type | Power module |
| AC Input | 90 to 264 VAC |
| Frequency | 47 to 63 Hz |
| DC Input | 100 to 150 VDC |
| Voltage regulation | 5, 12, and -12 VDC |
| Power Factor | > 0,93 |
| Output power | 100 Watts maximum (total for all 3 outputs) |
| Operating temmperature | 0-60 degrees Celsius |
The IC697PWR711 is a power supply module from the Ge Fanuc 90-30 Series Programmable Logic Controller (PLC) family. This module has a selectable input voltage compatibility such as 120 VAC and 240 VAC, dictated by an external jumper setting. For both the nominal vali input voltages, the applicable voltage range are 90 to132 VAC or 180 to 264 VAC, with frequency of 47 to 63 Hz.
The IC697PWR711 has output voltage supply of +5VDC, 12VDC and -12VDC and logic level sequencing signals towards the backplane. This power supply is mounted on the leftmost location of the 90-30 rack, attached via the 48-pin backplane connector. This power supply is capable of supplying power to a second rack provided that the total load of the additional rack will not exceed the total 100 Watt capacity of the IC697PWR711. Specifically, the 2nd rack must be less than 5.2 amperes. Additionally, powering the 2nd rack requires use of 3-feet connecting cable. The 2nd rack must be within the reach of this cable as it is not designed to operated more than 3 ft.
The has a slide in rack mount construction. The +5VDC delivers maximum output of 18 amperes, +12VDC a maximum output of 2 Amperes and maximum 1 Ampere from the -12VDC output. This power supply has an internal electronic short-circuit and overcurrent protection. For branch circuit fusing, an external switch that is appropriately sized must be installed. This power supply has an ON / OFF switch to put the power supply to active operation.
This module features a slide-in rack construction and 2-rack operation from a single power supply. The GE Fanuc Automation IC697PWR711 power supply module includes electronic short circuit protection and a power factor correction when it is operating with AC voltage. If the GE Fanuc Automation IC697PWR711 power supply module is meant to have continuous operations in environments with high temperatures and low line voltages, its specifications must be derated to guarantee safe operations. Normal operations are only possible with temperatures below 60 degrees Celsius. The GE Fanuc Automation IC697PWR711 power supply module is installed in the left slot of a GE IC697 rack or any VME integrator rack and it is a plug-in module type. This module comes with an input half-cycle peak inrush current of 3 Amps.
| Revision Part # | Also known as | |
|---|---|---|
| IC697PWR711B | IC697PWR711-B, Series B, Rev B | |
| IC697PWR711CX | IC697PWR711/X, Series X, Rev X | |
| IC697PWR711F | IC697PWR711-F, Series F, Rev F | |
| IC697PWR711G | IC697PWR711-G, Series G, Rev G | |
| IC697PWR711H | IC697PWR711-H, Series H, Rev H | |
| IC697PWR711J | IC697PWR711-J, Series J, Rev J | |
| IC697PWR711K | IC697PWR711-K, Series K, Rev K | |
| IC697PWR711L | IC697PWR711-L, Series L, Rev L | |
| IC697PWR711M | IC697PWR711-M, Series M, Rev M | |
| IC697PWR711N | IC697PWR711-N, Series N, Rev N | |
| Don't see your particular revision? Contact us now. | ||
- 1C697PWR711
- 1C697PWR7II
- IC697PWR71I
- IC697PWR7I1
- IC697PWR7II
Does the IC697PWR711 come with a warranty?
Yes, the IC697PWR711 includes a free 2-year DO Supply warranty. You can upgrade to a 3-year warranty at checkout for even more protection.
What is the output power rating of the IC697PWR711 power supply?
The IC697PWR711 has an output power rating of 100 Watts.
What are the output current ratings of the IC697PWR711?
The output current ratings are +5V at 18A; +12V at 2A; –12V at 1A.
Does this power supply come with an RS485 communication port?
No. it does not have an RS485 port.
The GE Fanuc Automation IC697PWR711 power supply module can operate with 2Â or more racks as long as the output power rating is not exceeded. This module has a power supply of 100 Watts.