IC610MDL158

The IC610MDL158 output module from GE Fanuc Emerson is part of the Series One and designed to function at 24 Volts DC. The module accommodates 16 output circuits, each rated for a switching capacity of 0.5 Amps at 24 Volts DC. The device's fuse current rating stands at 5 Amps for every 8 outputs, providing adequate protection for operational reliability.

Field wiring is facilitated through screw terminals located on a removable terminal board, enhancing accessibility during installation. Compatible wire sizes include one 12 AWG wire or two 14 AWG wires, allowing flexibility based on installation needs. The operating voltage can range from 5 to 24VDC, with a maximum peak voltage reaching 40VDC, supporting diverse applications.

In operation, the on-state voltage drop is a maximum of 1.5V, with two typical measurements recorded at 0.8V when operating at 0.5A and at 0.7V when operating at 0.1A. The module manages a maximum load of 16 circuits at 0.25A when ambient temperatures are at 30°C. However, if 6 circuits are powered at a higher capacity, this should be limited to 0.5A at 60°C. The power consumed by each circuit is rated at 12mA, thus maintaining efficient energy use.

Each output circuit includes an individual LED indicator to facilitate diagnostics and operational status verification. Weighing 200 grams, the IC610MDL158 module is a lightweight and efficient choice for industrial automation.