Free UPS Ground on All Parcel Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Johnson Controls VG7000 Series VG7441RT+3008EP

Product image is representative; revision or series may vary. Contact us to request a specific version.

VG7441RT+3008EP

|
Need a Specific Revision?

The VG7441RT+3008EP is a bronze control valve designed for efficient fluid regulation. With a size of 1-1/2 inches, this valve integrates a pneumatic actuator and positioner for enhanced control capabilities.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for VG7441RT+3008EP

ManufacturerJohnson Controls
Product TypeBronze control valve with pneumatic actuator and positioner
Product LineVG7000 Series
Part NumberVG7441RT+3008EP
Valve Size1-1/2 in. (DN40)
Body ConfigurationTwo-Way, Normally Closed/Push-Down-to-Open
End ConnectionThreaded (NPT)
Trim and FlowBrass Trim, Equal Percentage Flow
Flow Coefficient (Cv)28.9 Cv
Actuator ModelV-3000-8012 (Exposed Pneumatic Actuator) with V-9502 Positioner
Spring Range9 to 13 psig (62 to 90 kPa)
Max. Actuator Supply Pressure25 psig (172 kPa)
Maximum Closeoff Pressure23 psig (158 kPa)
Operating Temperature Range2 to 140°C (water); 38 psig saturated steam
Effective Diaphragm Area8 sq in.
Body MaterialCast Bronze
Stem TypeStandard Threaded Stem
Request a Repair

Constructed from cast bronze, the VG7441RT+3008EP model is a reliable control valve ideal for various industrial applications. Weighing 12.1 lbs, this valve is designed to fit within standard piping configurations. Its effective size of 1-1/2 inches (DN40) makes it suitable for both water and steam systems.

The valve operates as a two-way system, maintaining a normally closed state until activated by pushing down the actuator. The threaded NPT end connection allows for straightforward installation and connection to existing piping systems. The valve features high-quality brass trim to facilitate equal percentage flow characteristics, ensuring precise control over fluid dynamics.

Equipped with a V-3000-8012 exposed pneumatic actuator and a V-9502 positioner, this model delivers consistent performance based on its design specifications. The spring range for actuation runs between 9 and 13 psig (62 to 90 kPa), optimizing responsiveness in various operational scenarios. Furthermore, the maximum closeoff pressure is set at 23 psig (158 kPa), ensuring effective sealing during operation.

With an operating temperature capability from 2°C to 140°C for water and managing up to 38 psig saturated steam, this valve provides versatility across numerous industrial conditions. The effective diaphragm area measures 8 square inches, contributing to the valve's operational efficiency. Overall, this control valve is engineered to meet demanding fluid control requirements effectively.