AJ65SBTB116TC

Mitsubishi's AJ65SBTB116TC is classified as a digital remote output unit module that excels in automation setups. This module provides a total of 16 output points, enabling a range of control applications. A built-in Zener diode acts as a surge suppressor, offering protection against voltage spikes.

The module is designed for a variable external power supply voltage spectrum, which spans from 10.2 to 26.4 volts DC, maintaining a ripple ratio within 5%. In terms of performance, the unit exhibits a minimal maximum voltage drop of 0.3 V DC under standard conditions, while under adverse conditions the maximum voltage drop can reach 0.6 V DC. Operating effectively in ambient temperatures from 0 to 55 °C, this module fits well across various environments.

When it comes to speed, the output response time from OFF to ON is 0.5 ms or less, and the time to deactivate (ON to OFF) is 1.5 ms or less when handling a resistive load. During the OFF state, the leakage current is maintained at a mere 0.1 mA or less. The rated load voltage is set at 12/24 V DC, with a maximum load current of 0.5 A per point and a collective total of 3.6 A common to all points.

The AJ65SBTB116TC operates within a voltage range from 10.2 to 26.4 V DC and utilizes photocouplers for output isolation to ensure safe operation. The module can withstand a maximum inrush current of 1.0 A, sustained for a duration of 10 ms or less. The external power supply current remains low, at 30 mA or less under typical conditions of 24 V DC common, excluding the load current. This comprehensive specification set ensures that the AJ65SBTB116TC reliably supports various industrial automation tasks.