Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Mitsubishi FX Series FX-16EYS-ES-TBU

Product image is representative; revision or series may vary. Contact us to request a specific version.

FX-16EYS-ES-TBU

|
Need a Specific Revision?

Designed as an output expansion module, the FX-16EYS-ES-TBU from Mitsubishi is equipped with 16 output points. This module operates within an extensive input voltage range and maintains a connection with the PLC via a terminal block that uses M3.5 screws.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for FX-16EYS-ES-TBU

ManufacturerMitsubishi
Product LineFX Series
Part NumberFX-16EYS-ES-TBU
Weight0.69 lbs (0.31 kg)
Module DescriptionOutput expansion module
Connection FormTerminal block (M3.5 screws), connects to the PLC with a connector.
External Power Supply (Operational)85 to 242 V AC
Output Voltage Range100-240 VAC
Output Points16 points
Output TypeTRIAC (SSR)
Max. Resistance Load0.3 A/1 point; RMS current should be 0.2 A or less for frequent high rush current loads; total current for 4 resistance load points should be 0.8 A or less.
Max. Inductive Load15 VA/100 V AC and 36 VA/240 V AC
Insulation of CircuitPhotocoupler insulation
Open Circuit Leakage Current1 mA/100 V AC and 2 mA/200 V AC
Indication of OperationLED lit when phototriac power is supplied.
Response TimeApprox. 2 ms or less from OFF to ON, 12 ms or less from ON to OFF; response delay of the PLC not included.
Power Consumption2.7 W (112 mA at 24 V DC)
Request a Repair

The FX-16EYS-ES-TBU output expansion module from Mitsubishi introduces versatile connectivity options for controlling various devices. This module utilizes M3.5 screws in its terminal block to establish connections to the PLC with a direct connector interface. It is designed to accept an external power supply ranging from 85 to 242 V AC, ensuring compatibility with varying input requirements.

With 16 output points, this unit can efficiently manage connected equipment across a wide output voltage range of 100 to 240 VAC. The output type is based on TRIAC technology, which allows for solid-state relay applications.

The maximum resistance load that can be handled by each point is set at 0.3 amps. When dealing with loads that experience frequent high rush currents, the root-mean-square (RMS) current should remain at or below 0.2 amps. Additionally, when using four resistance load points, the total load current must not exceed 0.8 amps, reinforcing proper load management.

For inductive loads, specifications allow up to 15 VA at 100 V AC and up to 36 VA at 240 V AC to ensure reliable operation in diverse applications. The circuit insulation employs photocoupler technology, providing effective separation and increasing safety.

Leakage currents are measured at 1 mA for 100 V AC and 2 mA for 200 V AC, ensuring minimal energy loss under open circuit conditions. Operation is easily identifiable, as an LED indicator illuminates when power is supplied to the phototriac.

The response time of this module is swift; it can switch from OFF to ON in approximately 2 milliseconds, and revert to OFF in 12 milliseconds. It’s important to note that these times do not account for any delays caused by the PLC itself. Power consumption is rated at 2.7 watts, or 112 mA at 24 V DC, providing an efficient operational profile for modern control systems.