Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Mitsubishi FX Series FX-16EYS-TB

Product image is representative; revision or series may vary. Contact us to request a specific version.

FX-16EYS-TB

|
Need a Specific Revision?

The Mitsubishi FX-16EYS-TB is an output expansion module for the FX series and offers significant functionality in enhancing system capabilities. Its activation response time of about 2 ms ensures efficient operation in automation tasks.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for FX-16EYS-TB

ManufacturerMitsubishi
Product LineFX Series
Part NumberFX-16EYS-TB
Weight0.56 lbs (0.26 kg)
Product DescriptionOutput expansion module
Response TimeApprox. 2 ms or less from OFF to ON, 12 ms or less from ON to OFF (excludes PLC response delay)
Power Consumption2.7 W (112 mA at 24 V DC)
Connection FormTerminal block (M3.5 screws), connects to the PLC via a connector
External Power Supply (Operational)85 to 242 V AC
Output Voltage Range100-240 VAC
Output Points16 points
Output TypeTRIAC (SSR)
Max. Resistance Load0.3 A per point; for frequent ON/OFF operations, root-mean-square current should be 0.2 A or less, ensuring total load of 4 resistance load points does not exceed 0.8 A
Max. Inductive Load15 VA at 100 V AC and 36 VA at 240 V AC
Min. Load0.4 VA at 100 V AC and 1.6 VA at 200 V AC
Insulation of CircuitPhotocoupler insulation
Open Circuit Leakage Current1 mA at 100 V AC and 2 mA at 200 V AC
Indication of OperationLED illuminates when photo-thyristor power is supplied
Request a Repair

Mitsubishi's FX-16EYS-TB module is engineered as an output expansion device, enhancing the capabilities of your automation system. This unit features 16 TRIAC output points, allowing for reliable control of connected devices.

The module operates with an external power supply range of 85 to 242 V AC, providing flexible integration into various setups. Its output voltage range spans 100 to 240 VAC, catering to a range of operational requirements. The response time is roughly 2 ms for turning from OFF to ON, while transitioning from ON to OFF takes around 12 ms, excluding any PLC delay.

This module consumes a power of 2.7 W at 112 mA when supplied with 24 V DC. Connections are made via a terminal block with M3.5 screws, facilitating straightforward integration with the PLC through a connector. The maximum resistance load is set at 0.3 A for each output point, with an overall limit of 0.8 A across four resistance load points under specific conditions.

For inductive loads, the maximum ratings are 15 VA at 100 V AC and 36 VA at 240 V AC. The minimum load requirements are also 0.4 VA and 1.6 VA for 100 V AC and 200 V AC, respectively. Photocoupler insulation provides circuit isolation, ensuring stability and safety during operation. The open circuit leakage current is 1 mA for 100 V AC and 2 mA for 200 V AC. An LED indicator shows when power is actively supplied to the photo-thyristor, assisting in monitoring the device’s status.