FX-48ET

The Mitsubishi FX-48ET FX series extension unit or extension I/O module was designed to be used with compatible Mitsubishi programmable controllers. This extension unit is easy to install in a compatible Mitsubishi programmable controller system. The FX-48ET extension unit can be used in a variety of industrial applications. It is compatible with a 120/240 Volts AC-rated power supply, and it operates on an AC voltage range of 85 to 264 Volts AC and on a frequency rating of 50 or 60 Hertz. The FX-48ET extension unit can handle complex control applications because it has 24 inputs and 24 outputs. The FX-48ET extension unit’s 24 inputs are DC-powered sink inputs that are rated at 24 Volts DC. Its 24 outputs are transistor sink outputs. Its current capacity ratings include 0.5 Amps per point or 0.8 Amps per 4 points. The FX-48ET extension unit’s output voltage rating is 5 to 30 Volts DC. Its input current rating is 7 mA. The FX-48ET extension unit has an apparent power rating of 50 VA, and it was designed to be energy-efficient. Its robust hard plastic housing will keep it safe in non-hazardous environments. The FX-48ET extension unit can operate in a temperature range of 0°C to 55°C, and it can be stored in a temperature range of -20°C to 70°C. It can also operate with a relative humidity range of 10% to 90% (non-condensing). The FX-48ET FX series extension unit maintains its stability and dependability in a variety of environments and applications if it is installed, protected, and operated properly.