Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Mitsubishi MDS Servo Drives MDS-C1-V1-90-N

Product image is representative; revision or series may vary. Contact us to request a specific version.

MDS-C1-V1-90-N

|
Need a Specific Revision?

The Mitsubishi MDS-C1-V1-90-N MELDAS drive is a 1-axis servo drive unit that supports 9 kW of rated output power. It operates at 115 VAC of output rated voltage and 42 A of output rated current, and it requires 270 to 311 VDC of input rated voltage and 45 A of input rated current. The MDS-C1-V1-90-N drive’s control power supply voltage range is from 200 to 230 VAC at 50/60 Hz, with a maximum control power supply current rating of 0.2 A.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for MDS-C1-V1-90-N

ManufacturerMitsubishi
Product LineMDS Servo Drives
Part NumberMDS-C1-V1-90-N
Weight12.94 lbs (5.87 kg)
Module TypeServo Drive
Rated Output Power9 kW
Output Rated Voltage115 VAC
Output Rated Current42 A
Input Rated Voltage270 to 311 VDC
Input Rated Current45 A
Control Power Supply200 to 230 VAC, 50/60 Hz
Control Power Maximum Current0.2 A
Control Power Maximum Rush Current35 A
Control Power Maximum Rush Conductivity Time6 ms
Maximum Earth Leakage Current2 mA
Request a Repair

The Mitsubishi MDS-C1-V1-90-N MELDAS MDS-C1 series drive is a high-performance single-axis servo drive unit that was designed to deliver precise motor control in various applications. This servo drive operates with 9 kW of rated output power, and it can use this output power for a variety of demanding tasks. When operating at an output rated voltage value of 115 VAC, the unit supports an output rated current value of 42 A, ensuring efficient motor control. The input rated voltage range supported by the MDS-C1-V1-90-N drive is from 270 to 311 VDC, and the input rated current is 45 A. The control power supply voltage range of the MDS-C1-V1-90-N drive is 200 to 230 VAC at 50/60 Hz, with a maximum current rating of 0.2 A. The drive also supports a maximum rush current rating of 35 A during a 6 ms rush conductivity time. The maximum earth leakage current is limited to 2 mA for safety. The MDS-C1-V1-90-N employs a sine wave PWM control method and a current control method for precise control of servo motors. It features regenerative braking and a built-in dynamic brake to efficiently manage motor deceleration. Two external analog outputs rated at 0 to +5V are available for various adjustments. The MDS-C1-V1-90-N drive has a fully enclosed structure that can support an IP65 or IP67 protection rating (excluding the terminal block), and it uses forced air cooling. At the rated output, the amount of radiated heat is 331 Watts. The MDS-C1-V1-90-N drive weighs 5.8 kg. The MDS-C1-V1-90-N servo drive operates at less than 55 dB of noise.