Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Mitsubishi MDS Servo Drives MDS-C1-V2-3520S

Product image is representative; revision or series may vary. Contact us to request a specific version.

MDS-C1-V2-3520S

|
Need a Specific Revision?

The MDS-C1-V2-3520S model from Mitsubishi is a dual-axis servo drive designed for high-performance applications. This unit operates effectively at a rated power output of 3.5 kW and 2.0 kW, and it utilizes forced air ventilation to maintain optimal temperatures during operation.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for MDS-C1-V2-3520S

ManufacturerMitsubishi
Product LineMDS Servo Drives
Part NumberMDS-C1-V2-3520S
Weight10.00 lbs (4.54 kg)
Device TypeDual-Axis Servo Drive
Cooling TypeForced Air Ventilation
Power Output (Rated)3.5 kW + 2.0 kW
Control Power Supply Voltage200-230 V AC
Braking SystemRegenerative + Dynamic Braking
Output Voltage (Nominal)155 V AC
Protection RatingIP20 (Excluding Terminals)
Input Voltage Range270-311 V AC
Peak Earth Leakage Current4 mA
Max Control Power Current0.2 A
Output Current (Nominal)16.0 A + 13.0 A
Control Power Frequency Range50/60 Hz
Control TechniquePWM (Sine Wave) / Current Control
Heat Output at Full Load213 W
Input Current (Nominal)31 A
Request a Repair

The Mitsubishi MDS-C1-V2-3520S servo drive operates as a dual-axis device, ideal for dynamic applications requiring precise motion control. It is powered through a control supply voltage range of 200-230 VAC, ensuring compatibility in various settings. The rated power output reaches 3.5 kW plus an additional 2.0 kW, which supports heavier loads effectively.

To manage excess heat, the drive incorporates forced air ventilation, enhancing cooling efficiency. It delivers a nominal output voltage of 155 VAC and can handle an input voltage ranging from 270 VAC to 311 VAC. The braking system combines regenerative and dynamic braking capabilities to provide effective stopping power in various applications.

In terms of electrical parameters, the nominal output current evaluates at 16.0 A and 13.0 A, respectively. Its control technique adapts pulse-width modulation (PWM) with sine wave and current control, optimizing the performance of connected motors. The device is designed to operate within a control power frequency range of 50/60 Hz.

This drive also adheres to an IP20 protection rating, which denotes it is free from significant dust ingress, but terminals should be protected from direct exposure. Notably, the maximum control power current is specified at 0.2 A, with a peak earth leakage current of merely 4 mA. Under full load conditions, the heat output registers at 213 watts, contributing to the overall efficiency of the system during operation.