MDS-D-V2-8080

The Mitsubishi MDS-D-V2-8080 servo drive is an MDS-D-V2 series dual-axis or 2-axis servo drive unit with a compact design. It measures 60 mm in width. The MDS-D-V2-8080 servo drive supports efficient motor control with a nominal maximum current rating of 80/80 Amps (peak) for each axis. The drive’s rated output voltage is 155V AC, 3-phase, with a corresponding output current rating of 14.6/14.6 Amps. The MDS-D-V2-8080 drive’s DC input voltage range is 270 to 311V DC, with a current rating of 28 Amperes. Additionally, the servo drive’s AC input voltage ratings are 200/200-230V AC, 1-phase, with a current rating of 0.2 Amps. Its control power maximum rush current rating is 30 Amps with a connectivity time rating of 6 ms. The MDS-D-V2-8080 servo drive employs a sine wave PWM control method and a current control method for precise control. It includes regenerative braking and dynamic braking features. The drive’s analog output option is 2 channels with a signal range of 0 to +5V, and these outputs provide data for various adjustments. The MDS-D-V2-8080 has an IP20 overall protection rating and an IP00 protection rating for terminal block TE1. It uses forced air cooling for effective heat dissipation and produces noise levels below 55 dB during operation. At the rated output, the MDS-D-V2-8080 drive radiates 182 Watts of heat. The MDS-D-V2-8080 servo drive has a rated input capacity of 5.4 kVA, a standard rated output power capacity, of 2 kW, and a maximum momentary output power capacity of 8 kW. The MDS-D-V2-8080 servo drive weighs 4.5 kg.