Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Mitsubishi MDS Spindle Drives MDS-C1-SP-220

Product image is representative; revision or series may vary. Contact us to request a specific version.

MDS-C1-SP-220

|
Need a Specific Revision?

Mitsubishi designed the MDS-C1-SP-220 as a single-axis spindle drive. It provides a nominal output power of 22.0 kilowatts and operates on a control voltage of 200 to 230 volts AC, functioning at a frequency of 50/60 hertz.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for MDS-C1-SP-220

ManufacturerMitsubishi
Product LineMDS Spindle Drives
Part NumberMDS-C1-SP-220
Weight14.50 lbs (6.58 kg)
Drive TypeSingle-axis spindle drive
Power Supply Voltage for Control200–230 volts AC
Power Supply Frequency50/60 hertz
Peak Current for Control Power0.2 amperes
Nominal Output Power22.0 kilowatts
Output Voltage155 volts AC
Output Current79.0 amperes
Inrush Current Maximum35 amperes
Input Voltage Range270–311 volts DC
Input Current95.0 amperes
Analog Output Channels0 to +10 volts, 2 channels
Enclosure Protection RatingIP20 (except terminal block area)
Cooling SystemAir cooling with forced ventilation
Heat Dissipation at Rated Power366 watts
Request a Repair

Operating as a single-axis spindle drive, the Mitsubishi MDS-C1-SP-220 is engineered to deliver efficient performance. It accommodates control power at an input range of 200 to 230 volts AC, suitable for typical industrial equipment. This unit is compatible with a power supply frequency of either 50 or 60 hertz. The drive boasts a nominal output power of 22.0 kilowatts, putting it on the higher end of the performance spectrum.

The output voltage for this spindle drive is set at 155 volts AC, with an output current rating of 79 amperes. Additionally, it can handle an inrush current peaking at 35 amperes. The input current can reach 95 amperes, so careful consideration is needed for appropriate power supplies.

For control purposes, the analog output channels offer a range from 0 to +10 volts, with two channels total available. It's also important to note that the drive features an enclosure with an IP20 protection rating, providing basic safeguard capabilities aside from the terminal block area.

Cooling is managed via an air cooling system incorporating forced ventilation to maintain optimal operating temperatures. Weighing 6.5 kilograms, the spindle drive is constructed to deliver reliable performance while dissipating 366 watts at nominal power ratings. The design balances functionality and efficiency, making it a practical choice for users requiring dependable spindle drive operations.