Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Mitsubishi MDS Spindle Drives MDS-C1-SPM-300

Product image is representative; revision or series may vary. Contact us to request a specific version.

MDS-C1-SPM-300

|
Need a Specific Revision?

The MDS-C1-SPM-300 from Mitsubishi provides effective single-axis spindle drive capabilities. It delivers a substantial power output of 30.0 kW with an output current of 130 A at a 155 V (AC) voltage.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for MDS-C1-SPM-300

ManufacturerMitsubishi
Product LineMDS Spindle Drives
Part NumberMDS-C1-SPM-300
Weight5.94 lbs (2.69 kg)
Drive TypeSingle-axis spindle drive unit
Power Output30.0 kW
Output Voltage155 V (AC)
Output Current130 A
Cooling SystemAir-forced cooling
Protection RatingIP20 (excluding connection block)
Analog Output Range0 to +10 V, dual channels
Braking TechniqueRegenerative brake system
Control StrategyPWM sine wave / current regulation
Input Voltage Range270–311 V (DC)
Input Current144 A
Control Power Voltage200–230 V (AC)
Control Power Frequency50/60 Hz
Peak Control Current0.2 A
Request a Repair

Operating within the Mitsubishi MDS Spindle Drives series, the MDS-C1-SPM-300 is specifically designed for single-axis spindle applications. This drive unit can output 30.0 kW and delivers an output current of 130 A at 155 V (AC). It can handle input voltages between 270 and 311 V (DC), making it suitable for various power conditions.

It utilizes an air-forced cooling system to handle heat effectively, enhancing operation reliability. Its IP20 protection rating ensures safety for internal components, though it is not protected against water. The MDS-C1-SPM-300 has dual analog output channels, providing an output range of 0 to +10 V for precision control tasks.

This spindle drive implements a regenerative braking technique that minimizes energy loss and allows for efficient energy recovery during operation. The control strategy is based on PWM sine wave modulation alongside current regulation, ensuring optimized performance across various applications.

It accepts voltage from 200 to 230 V (AC) for control power requirements and operates at standard frequencies of 50 or 60 Hz. The input current for this unit is rated at 144 A, with a peak control current of 0.2 A. These factors make the Mitsubishi MDS-C1-SPM-300 an effective choice for precision spindle control in industrial environments.