QY82P

The QY82P module manufactured by Mitsubishi falls under the Melsec-Q series and serves as a transistor output module with extensive capabilities. This module accommodates a total of 64 output points, efficiently managing various tasks within automation applications. Operating within a rated load voltage of 12 to 24 VDC, it is designed for flexibility and compatibility.

The isolation of this module is achieved through a photocoupler, ensuring secure operation in various environments. It can handle a maximum load current of 0.1A per individual point and supports up to 2A across common points. With a maximum inrush current rated at 0.7A for brief durations (10 milliseconds or less), the module ensures robust performance during power fluctuations.

At rest, the leakage current measures at 0.1 mA or less when OFF. When activated, the maximum voltage drop at ON is approximately 0.1VDC when tested at 0.1A, peaking to about 0.2VDC at the same current. Additionally, a built-in surge suppressor using a Zener diode contributes to the reliability of the module.

While this transistor output module does not incorporate a fuse, it requires an external supply voltage ranging from 12 to 24 VDC, drawing 40 mA at 24VDC per common. The design is rated at IP2X for protection, adding a layer against dust and contact. With a typical internal current consumption of 160 mA at 5VDC (with all points active), this component is lightweight, weighing in at just 0.17 kg.