Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Mitsubishi MELSERVO MR-J2 MR-J2-F40A

Product image is representative; revision or series may vary. Contact us to request a specific version.

MR-J2-F40A

|
Need a Specific Revision?

Part of Mitsubishi's MELSERVO MR-J2 series, the MR-J2-F40A functions as a servo amplifier. The device boasts a substantial output of 400 W and handles input voltages of 3-phase 200-230VAC or single-phase 230VAC, both operating at 50/60 Hz.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for MR-J2-F40A

ManufacturerMitsubishi
Product LineMELSERVO MR-J2
Part NumberMR-J2-F40A
Weight10.00 lbs (4.54 kg)
DeviceServo Amplifier
Rated Output400 W
Voltage/Frequency3-phase 200-230VAC with 50/60Hz or single-phase 230VAC with 50/60Hz
Voltage Fluctuation170-253VAC (3-phase), 207-253VAC (single-phase)
Frequency Fluctuation±5%
EEP-ROM Write Limit100,000 write cycles
Control SystemSine-wave PWM, current control
Dynamic BrakeBuilt-in
Display4-digit, 7-segment LED
Torque Limit Input0 to ±10VDC/maximum current (except the torque control mode)
Maximum Input Pulse Frequency Ratings400kpps (with differential receiver), 200kpps (with open collector)
Power Failure Protection OptionInstantaneous Option
Error Excessive±80 kpulse
Speed Control RangeAnalog: 1-1000, Internal: 1-5000
Speed Command Input (Analog)-
Request a Repair

The MR-J2-F40A is a versatile servo amplifier within the Mitsubishi MELSERVO MR-J2 series. With a rated output of 400 watts, it accommodates 3-phase voltage inputs of 200-230VAC and single-phase inputs of 230VAC, applicable in environments using either 50 or 60 Hz frequency. The servo amplifier allows 170-253VAC fluctuations for 3-phase and 207-253VAC fluctuations for single-phase operation while maintaining frequency fluctuations of ±5%.

This unit integrates advanced control systems, utilizing sine-wave PWM and current control methods. It features an EEP-ROM capable of sustaining 100,000 write cycles. The 4-digit, 7-segment LED display provides convenient feedback for monitoring performance. Input for torque limits ranges from 0 to ±10VDC, adjusting maximum current except in torque control mode.

Regarding frequency specifications, the maximum input pulse frequency reaches 400 kpps when using a differential receiver or 200 kpps with an open collector setup. An instantaneous option for power failure protection enhances reliability during operation. The device also accommodates error signals of ±80 pulses.

Speed control is accessible via an analog command input, offering a range of 1-1000 for external commands and an internal control capability of 1-5000. The MR-J2-F40A unit's robust specifications make it a reliable choice for precise motion control in various applications.