MR-J2S-10A1

Mitsubishi Electric manufactures the MR-J2S-10A1 servo amplifier. It is part of the MR-J2S series and is intended for precise control and operation of servo motors in industrial automation applications. The servo amplifier has an output power rating of 100 watts (0.1 kilowatts). It has a general-purpose interface that allows it to work with a variety of control systems and devices. It runs on a single phase of alternating current. The MR-J2S-10A1 is rated for a power supply voltage range of 100 to 120V AC. Depending on the application's needs, the input frequency can be 50/60 hertz. It has an allowed 1-phase AC voltage fluctuation rating of 85 to 127 volts AC. The amplifier's output voltage is defined as 170 volts AC, which is used to power the associated servo motor. To maintain accurate control and effective performance, this voltage is carefully adjusted. The maximum current that flows into the primary circuit during power-up is stated as 59A for the main circuit inrush current. On the other hand, the inrush current of the control circuit varies from 100 to 130 amps depending on the conditions. The servo amplifier has an inverse efficiency rating of 55%. This ensures a quick and accurate reaction to control signals. For leakage circuit breakers, the MR-J2S-10A1 servo amplifier has a rated sensitivity current of 15 milliamps. This confirms that the servo amplifier is compatible with the system's required safety devices. Mitsubishi Electric's MR-J2S-10A1 general purpose (single phase) AC servo amplifier is a compact and dependable device developed for regulating and driving servo motors.