MR-J2S-15KB

The MR-J2S-15KB is a servo amplifier designed for controlling industrial motors that operate on AC voltage. This servo amplifier has been designed and manufactured by Mitsubishi Electric and is part of the MELSERVO-J2-Super product series. The MR-J2S-15KB servo amplifier serves as an intermediary link between a control system and a servo motor. Its primary purpose is to precisely regulate the electrical signals that it receives from the control system and convert them into the voltage and current levels that the connected servo motor requires so that the servo motor can operate. This fine-tuned servo amplifier supports accurate and dynamic control of the servo motor's speed, position, and torque. The MR-J2S-15KB servo amplifier has a 3-phase power supply voltage rating of 200-230V AC and a 3-phase permissible power supply voltage fluctuation range from 170 to 253V AC. The frequency rating is 50/60 Hertz for both of these voltage ranges. The MR-J2S-15KB servo amplifier can also support a frequency fluctuation range of +/-5%. It features a built-in dynamic brake. The capacitor of the MR-J2S-15KB servo amplifier requires 6 minutes to discharge, and the charging section of the servo amplifier should not be touched for at least 10 minutes after the servo amplifier has been powered off to avoid injury. The MR-J2S-15KB servo amplifier supports a current control system and a sine-wave PWM control system. It can operate safely in non-freezing conditions at ambient temperatures between 0 and 55 degrees Celsius. The MR-J2S-15KB servo amplifier should also be protected from direct sunlight and flammable or corrosive gasses. The MR-J2S-15KB servo amplifier supports a power supply capacity rating of 22 kVA with several different servo motor models.