MR-J2S-40B1

The Mitsubishi MELSERVO-J2-Super series MR-J2S-40B1 servo amplifier is a powerful and versatile device tailored for precision motor control. It is compatible with a wide range of Mitsubishi servo motors, including the HC-KFS-43, HC-MFS-43, and HC-UFS-43 servo motor models. It operates with a single-phase AC power supply, and it offers stable and reliable performance. Its power supply voltage range is from 100 to 120 Volts AC at 50/60 Hz frequency. To ensure safe operation, the MR-J2S-40B1 servo amplifier is equipped with multiple protective functions. These protective functions include overcurrent shut-off protection, regenerative overvoltage shut-off protection, overload shut-off protection with an electronic thermal relay, servo motor overheating protection, encoder fault protection, regenerative fault protection, under-voltage protection, instantaneous power failure protection, overspeed protection, and excessive error protection functions. With these protective functions, the MR-J2S-40B1 servo amplifier guarantees the longevity and safety of the entire motor control system. The servo amplifier’s built-in dynamic brake further enhances its control capabilities so that it can decelerate and stop the motor when needed. It has an open enclosure with an ingress protection rating of IP00. This enclosure is self-cooled. Its design makes it suitable for indoor use only. The MR-J2S-40B1 needs to be protected from direct sunlight and used in indoor environments that are free from corrosive gas, flammable gas, oil mist, moisture, dust, and dirt. Additionally, it can operate effectively at altitudes of up to 1000m (3280ft) above sea level. The MR-J2S-40B1 servo amplifier supports an ambient operating temperature range of 0 to 55°C and a storage temperature range of 20 to 65°C. The MR-J2S-40B1 weighs about 1.1 kg or 2.4 lbs.