3G2A3-OC221

The 3G2A3-OC221 expansion I/O unit from Omron Corporation 3G2 sequences products is specifically configured as a relay contact output module and is intended for offering additional output points for industrial automation or PC systems. The 3G2A3-OC221 module has four output points for sending control signals to external devices. It features four circuits that allow for independent control of each output point. The module's output switching capacity is rated at 250 volts AC or 24 volts DC, with a maximum current rating of 2 amps. This guarantees that it is compatible with a wide range of loads and devices. The module's relay driving voltage is defined as 12V DC and is supplied internally. The module's rated current is 2 amps, which is the maximum current that can flow via each output point. The module has a maximum ON-delay time of 15 milliseconds, which is the amount of time it takes for the output to activate after receiving a control signal. Similarly, the OFF-delay time is set to 5 milliseconds, indicating how long the output can deactivate after the control signal is disconnected. The 3G2A3-OC221 module has an internal current consumption rating of 2.2 watts. The module's maximum switching frequency is 1,800 operations per hour, which denotes the number of times the output may be turned on and off in a particular timeframe. The module's service life is given as 100,000 operations at least, suggesting its longevity and dependability over extended durations of use. The 3G2A3-OC221 module is lightweight (around 250g), making it simple to handle and install. It comes with a 13cm I/O connection cord.