C200HW-CORT21

The Omron C200HW-CORT21 is a CANopen Slave Unit specifically designed for seamless integration into the C200/CS1-series Host PLC system, including models C200HE, C200HG, C200HX, and CS1-series. This unit can be mounted on a CPU Rack or an expansion I/O Rack, offering flexibility in system configuration. This unit has a current consumption rating of 250 milliamperes max at 5 volts DC from the PLC's internal I/O power supply. The C200HW-CORT21 can be stored in areas with temperatures ranging from -20 to +75 degrees Celsius and operated in areas with temperatures ranging from 0 to +55 degrees Celsius. It can also function efficiently under varying humidity conditions, ranging from 10% to 90% non-condensing. The unit complies with EMC and environmental standards, adhering to EN50081-2 and EN61131-2 regulations, ensuring reliable performance and protection against electromagnetic interference. For user-friendly configuration, the C200HW-CORT21 offers an intuitive user interface. Users can set the special I/O unit number (ranging from 0 to F) using the rotary switch at the front, adjust the Network baud rate (ranging from 10 kbit/s to 1000 kbit/s) via the three DIP switches at the front, and assign the CANopen node address (from 001 to 127) using the seven DIP-switches at the rear. The unit status is conveniently indicated by two LEDs, with a green LED indicating the RUN status and a red LED indicating any ERRors. Furthermore, the Network status is displayed using a 2 x 7-segment display. In terms of data transfer, the C200HW-CORT21 offers three words for PLC to Unit communication and five words for Unit to PLC communication. Additionally, this product provides 20 words for DM settings. The CAN interface follows the ISO 11898 High-Speed CAN standard, and the unit is equipped with a 5-pin male open-style connector for easy connectivity. It supports node addresses from 1 to 127, but the remote setting is not supported while offering multiple baud rates ranging from 10 kbit/s to 1000 kbit/s.