CJ1W-V600C11

The Omron CJ1W-V600C11 module is an ID sensor unit categorized as a special I/O unit in the Omron CJ series. It can be used in an Omron CJ series programmable controller. Its impact on the CPU unit's cycle time is minimal at just 0.15 ms. At 5V DC, the CJ1W-V600C11 module’s maximum internal current consumption rating is 260 mA. At 24V DC, the module’s maximum internal current consumption rating is 120 mA. The CJ1W-V600C11 module’s dimensions are 31 × 90 × 65 mm (W×H×D), and its weight is 120 g maximum. It is a compact and lightweight addition to the CJ series programmable controller system. The CJ1W-V600C11 module can be installed on a CJ-series rack or CJ-series expansion rack, but it is not compatible with C200H expansion I/O racks or SYSMAC BUS slave racks. Up to 4 units can be installed per rack. It interfaces seamlessly with V600-series R/W heads and is compatible with V600-series data carriers. The CJ1W-V600C11 module operates with 1 allocated unit number and supports up to 10 allocated words. It employs a special protocol for its control protocol, and it can manage a maximum data transfer quantity of 2,048 bytes (160 bytes per scan). The CJ1W-V600C11 module’s operating modes include the Normal Mode and the Test Mode, and these modes are switchable through a communications test switch. The CJ1W-V600C11 ID sensor unit features diagnostic functions such as the ID sensor unit error detection function, communications error detection function with data carriers, and the head 24-V power supply error monitoring function. The unit’s communication frequency rating is 530 kHz, and its communication control options include the EEPROM Data Carrier communications mode adjustment (distance priority or time priority), write verification, and auto wait time setting options.