Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Schneider Electric Modicon BMXAMO0802H

Product image is representative; revision or series may vary. Contact us to request a specific version.

BMXAMO0802H

|
Need a Specific Revision?

The BMXAMO0802H is an analog output module from Schneider Electric's Modicon series, offering a total of eight analog outputs. This unit allows for both 0...20 mA and 4...20 mA output configurations and provides a resolution of 16 bits for precise operation.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for BMXAMO0802H

ManufacturerSchneider Electric
Product LineModicon
Part NumberBMXAMO0802H
EAN3606489698645
NameAnalog Output Module
Electrical Connection20 ways 1 connector
Isolation Voltage1400 V DC between channels and ground; 1400 V DC between channels and bus
Detection TypeOpen circuit 4...20 mA; Short circuit 0...20 mA
Load Impedance Ohmic<= 350 Ohm for both 0...20 mA and 4...20 mA
Analogue Output Number8
Analogue Output TypeCurrent: 0...20 mA and 4...20 mA
Analogue Output Resolution16 bits
Conversion Time<= 4 ms
Status LED1 green RUN LED; 1 green LED for each channel diagnostic; 1 red ERR LED; 1 red I/O LED
Power Consumption3.6 W typical at 24 V DC; 3.9 W maximum at 24 V DC; 0.35 W typical at 3.3 V DC; 0.48 W maximum at 3.3 V DC
Current Consumption150 mA at 3.3 V DC; 135 mA at 24 V DC
Shock Resistance30 gn
IP Degree of ProtectionIP20
Request a Repair

The Schneider Electric BMXAMO0802H serves as an analog output module equipped with eight distinct outputs. It is designed to operate with both 4...20 mA and 0...20 mA current outputs, ensuring flexible performance in various applications. With a notable 16-bit resolution, this module ensures high precision in signal representation.

For connectivity, the module is fitted with a 20-way connector. It boasts a robust isolation voltage of 1400 V DC between both the channels and ground, as well as between the channels and the bus, reinforcing its reliability in numerous operational environments. The load impedance supported is capped at 350 Ohms for both analog output configurations.

Status indication is comprehensive, with a green RUN LED, dedicated green LEDs for channel diagnostics, a red ERR LED, and a red I/O LED enhancing operational visibility and troubleshooting capabilities. This module operates efficiently with a conversion time of up to 4 milliseconds.

In terms of physical specifications, its weight is approximately 0.15 kg, and it shows a power consumption of 3.6 Watts typically at 24 V DC and a maximum of 3.9 Watts under the same conditions. Current consumption is rated at 150 mA for 3.3 V DC and 135 mA when powered by 24 V DC. The BMXAMO0802H also exhibits a shock resistance rating of 30 gn, while its enclosure is rated to IP20, making it suitable for installation in environments where dust and water exposure are minimal.