Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Siemens SIMODRIVE 6SC6130-0FE00

Product image is representative; revision or series may vary. Contact us to request a specific version.

6SC6130-0FE00

|
Need a Specific Revision?

The Siemens 6SC6130-0FE00 is designed as an AC feed drive power PCB, functioning effectively within the SIMODRIVE series. It supports a continuous rated current of 30 Amps and can handle short-term peaks up to 60 Amps, making it suitable for demanding applications.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for 6SC6130-0FE00

ManufacturerSiemens
Product TypeAC Feed Drive Power PCB
Product LineSIMODRIVE
Part Number6SC6130-0FE00
Weight1.06 lbs (0.48 kg)
Rated Current30 Amps (continuous operation)
Peak Current Capacity60 Amps (maximum short-term output)
Axis ConfigurationSingle-axis operation
Unit Mass~2.2 kg
System IntegrationCompatible with SIMODRIVE 610 drive units
Input Voltage380–480 VAC, 3-phase
Output Frequency0–400 Hz
Switching Frequency~8 kHz
DC Bus Voltage~600 V
Overload Capacity150% of nominal current
Operating Temperature0°C to 50°C
Efficiency~97%
Request a Repair

The part number 6SC6130-0FE00 from Siemens falls under the SIMODRIVE series and serves as an AC feed drive power printed circuit board. Rated for continuous operation at 30 Amps, this device can tolerate peak currents reaching 60 Amps, providing substantial short-term output capabilities.

This unit is built for single-axis operation and has an approximate weight of 2.2 kg, allowing for manageable installation in various configurations. It is specifically compatible with SIMODRIVE 610 series drive units, facilitating integrated system operations. The power supply requirements include a 3-phase input voltage rated between 380 and 480 VAC, presenting versatility in different electrical environments.

The unit supports an output frequency range from 0 to 400 Hz, with a switching frequency around 8 kHz, aligning with standard industrial motor control needs. Furthermore, it maintains a DC bus voltage of around 600 V, ensuring reliable performance.

In terms of thermal management, the 6SC6130-0FE00 can operate within temperatures stretching from 0°C to 50°C and supports an impressive overload capacity of 150% of its nominal operational current. This capability makes it suitable for high-demand applications where transient loads may exceed standard ratings. Lastly, it demonstrates an efficiency of approximately 97%, confirming its operational effectiveness for demanding scenarios.