6SL3210-1NE23-2AG1

The 6SL3210-1NE23-2AG1 from Siemens is an efficient device in the SINAMICS G120 series, built to enhance industrial motor control. It boasts a power rating of 15 kW (20 HP) and can operate with input voltages from 380V to 480V AC using a 3-phase system. The unit can function at an input frequency between 47 and 63 Hz, making it versatile for different applications.

As for the output capabilities, this drive provides voltages from 0V to 480V AC and can handle output frequencies up to 650 Hz, enabling it to cater to a range of motor requirements. Rated for 32 A output current, it employs both vector control and V/f control techniques, yielding an impressive efficiency level exceeding 97%.

Cooling is managed through forced air, ensuring effective heat dissipation during operation. The unit is suitable for ambient temperatures ranging from 0°C to +40°C, with operational derating advised if temperatures exceed 40°C. Additionally, the overload capacity features up to 150% for short durations of 3 seconds, which allows for brief spikes in operational demand.

For safety, the device incorporates Safe Torque Off (STO) functionality, ensuring enhanced operational security. It also supports communication interfaces such as PROFINET and PROFIBUS DP, allowing integration with various network setups. The physical dimensions of the 6SL3210-1NE23-2AG1 measure 355 mm in height, 140 mm in width, and 165 mm in depth, fitting adequately into standard control environments. With an IP20 ingress protection rating, it is suitable for locations where exposure to environmental factors is limited.