Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Yaskawa GPD GPD-333-Device-Net-Network Wiring

Product image is representative; revision or series may vary. Contact us to request a specific version.

GPD-333-Device-Net-Network Wiring

|
Need a Specific Revision?

The Yaskawa GPD-333 Device-Net Wiring is specifically designed for use as AC drive wiring in DeviceNet networks. It employs shielded twisted pair (Type 5) cables and features configurable baud rates of 125, 250, or 500 kbps, supporting effective communication across the network.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for GPD-333-Device-Net-Network Wiring

ManufacturerYaskawa
Product TypeAC Drive Wiring
Product LineGPD
Part NumberGPD-333-Device-Net-Network Wiring
Network TypeDeviceNet
Cable TypeShielded twisted pair (Type 5)
Termination120 Ω resistor at each end of trunk
TopologyDaisy chain with short spurs
Trunk Cable Size18 AWG
Spur Cable Size20 AWG
Max Spur Length1 meter per device
Max Trunk Length500 m @ 125 kbps
Shield GroundingConnected at drive only
Baud Rate125 / 250 / 500 kbps (selectable)
Power Supply24 VDC from network
Connector Type5-pin open-style or mini DIN
LED IndicatorsMS/NS for status and diagnostics
Node AddressSet via DIP switches
Request a Repair

Yaskawa's GPD-333 Device-Net-Network Wiring serves as the foundational conduit for AC drive connectivity in DeviceNet systems. The wiring system is constructed using shielded twisted pair (Type 5) cables, ensuring minimized interference and enhanced signal integrity. At either end of the trunk, 120 Ω resistors are employed to facilitate proper termination, playing a crucial role in maintaining signal fidelity throughout the network.

Organized in a daisy chain configuration, this setup includes short spur connections, allowing for versatile configurations within the system. The trunk cable is sized at 18 AWG, providing substantial conductivity over distances, while spur connections utilize 20 AWG cables, ensuring efficient performance. With a maximum trunk length capability of 500 meters running at 125 kbps, this wiring supports extensive network layouts. Each device spur, however, is limited to a maximum length of 1 meter.

The system also includes selectable baud rates of 125, 250, or 500 kbps, enabling flexibility to meet various application requirements. Powered by a 24 VDC supply from the network, this wiring is equipped with 5-pin open-style or mini DIN connectors for easy integration. Notably, LED indicators are included, providing real-time monitoring of master/slave status and diagnostics, which aids in system maintenance. Node addresses can be conveniently configured through DIP switches, streamlining setup processes.