Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Yaskawa GPD GPD503-4L150

Product image is representative; revision or series may vary. Contact us to request a specific version.

GPD503-4L150

|
Need a Specific Revision?

The Yaskawa GPD503-4L150 serves as an AC drive designed for versatile application in various industrial settings. It is engineered to operate at an input voltage of 460 VAC across a three-phase system and is capable of delivering a rated output power of 150 HP.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for GPD503-4L150

ManufacturerYaskawa
Product TypeAC Drive
Product LineGPD
Part NumberGPD503-4L150
Storage Temperature-20 to 60 °C
Feedback SupportOptional encoder via AI-14B
Protection ClassIP20 (drive chassis)
Overload Capacity150% for 60 s
Ambient Temperature0 to 40 °C
Clearance6 in above/below, 2 in sides
Humidity≤95% non-condensing
Vibration Rated1 G @10–20 Hz; 0.6 G up to 55 Hz
Input Voltage460 VAC (3-phase)
Input Frequency50/60 Hz
Rated Output Power150 HP
Rated Output Current224 A (100% cont.)
Control MethodSine-wave PWM (V/Hz)
Request a Repair

The GPD503-4L150 from Yaskawa is an AC drive that is capable of functioning effectively under various conditions. The device is rated for 460 VAC in a three-phase configuration. It can output a rated power of 150 HP and maintain a continuous output current of 224 A. The control method utilized is sine-wave PWM (V/Hz), ensuring efficient motor control.

The design of this drive incorporates a protection class rating of IP20, indicating that it should be used in environments free from excessive dust and moisture. In addition, the GPD503-4L150 has an overload capability allowing it to operate at 150% of its rated output for up to 60 seconds, making it ideal for applications that require short bursts of higher power.

Operating temperature is specified from 0 to 40 °C, while the drive can be stored in temperatures ranging between -20 °C and 60 °C. Humidity levels should not exceed 95% without condensation.

The drive's vibration tolerance is rated at 1 G for frequencies between 10 and 20 Hz and at 0.6 G for frequencies up to 55 Hz, contributing to its reliability during operation. The unit weighs approximately 224 pounds, making it significant in its intended installations. It is important to maintain appropriate clearance around the unit, with 6 inches required above and below and 2 inches on the sides to ensure adequate airflow and heat dissipation.