7333 results
This rotary switch features three poles and has a robust interrupting capacity of 200 kA at 600 volts. The device provides various horsepower ratings: up to 25 Hp at 200 VAC, 30 Hp at 230 VAC, 60 Hp at 460 VAC, and 75 Hp at 575 VAC. The switch is constructed for open type mounting, enabling straight
The Allen Bradley 1326AB-B515E-21-L Servo Motor has an IEC Metric Flange with Keyway and a 31.2 Nm System Peak Stall Torque.
This breakout board has a maximum cable diameter of 11.4 mm (0.45 in.) and accommodates wire sizes from 30 to 16 AWG for the screw terminals. It is intended for use in drives that support motor feedback functionality. When mounting this component, a torque of 0.40 Nm is recommended for the screws, w
Operating at 400V, this low-inertia servo motor utilizes a 75 mm frame size and offers a rated speed of 3500 RPM. It integrates three magnet stacks for improved performance and employs an 18-bit absolute single-turn digital encoder for precise feedback. This unit has a right-angle SpeedTec DIN conne
The 800T-FXTQH10RA1 is the part number for a 2-position push-pull/twist pushbutton from Allen Bradley. This pushbutton has an operating voltage rating of 600 Volts AC/DC. It also has a maximum current rating of 10 Amps.
The 100-B300ND3 Contactor contactor is a non-reversing contactor made by Allen Bradley/Rockwell Automation. It comes with 3 poles, 600 Volts of rated voltage, and 30 Amps of rated current. The coil ratings of the module are 110 to 120 Volts and 50/60 Hertz.
This device has a cap diameter of 40 mm and a hole diameter of 22.5 mm, allowing for simple installation in compatible enclosures with IP69K and IP66 ratings. Its mechanical design life is rated for 300,000 cycles, while the contact block is rated for up to 10,000,000 cycles, ensuring reliable long-
This limit switch supports rotary lever actuation and is rated for 10 A AC. The unit functions with four switching circuits, often configured as two normally open (NO) and two normally closed (NC). NEMA Type 4 and 13 ratings enhance its protection against dust and moisture, and it operates within a
This device operates under a current rating of 7A and supports three poles. It is rated for 600 V AC and 250 V DC, with an insulation voltage capacity of 690 V~ or 250 V. The motor circuit protector adheres to UL 489 standards and is designed to work with 60/75 °C wire. The mounting method is screw
The MPS-B4540F-SJ52DA Stainless-steel Servo Motor has a IP66/IP67/IP69K Housing Enclosure, a IEC metric, tapped mounting holes (type FT) Mounting Flange, and a 1024 sin/cos, absolute single-turn encoder (Hiperface protocol) Feedback.
This auxiliary contact features a normally closed (N.C.) arrangement and is compact in size with dimensions of 3.25 inches in length, 0.25 inches in width, and 1.75 inches in height. It requires compact bus bars for proper installation with a 45 mm spacing, enhancing its adaptability in various setu