971 results
This ball valve features stainless steel trim that supports equal percentage flow characteristics. The valve measures 1-1/2 inches in size and has a control port Cv rating of 29.2. It operates under a control signal range of 0(2) to 10 volts DC or 0(4) to 20 mA, with a voltage rating of 24 VAC, ensu
As a two-way control valve with a push-down-to-close mechanism, the VG7241LT+3008EP is built using cast bronze and weighs 6.5 lbs. Its NPT threaded connections ensure secure integration, while the valve supports a maximum closeoff pressure of 69 psig. Operating temperatures range from 2°C to 140°C f
This ball valve supports equal percentage flow characteristics with a control port Cv value of 46.8. The actuator, designated as VA9208-BAA-3, operates at 120 VAC and modulates on/off control. The valve accommodates fluid temperatures between -30 °C to 100 °C and is not rated for steam applications.
This variable speed drive operates at 480 VAC with an acceptable input voltage range of 380 to 600 volts, allowing for flexibility within -15% to +10%. The output frequency can reach up to 400 Hz, and it has a current output rating of 12 A. Designed with resilience, it operates effectively within -1
This device operates efficiently within a temperature span of -23 to 51°C, with an alternate range of 43 to 118°C available on a dual-sided dial. The controller has a surface mounting design and features a bulb element type for accurate temperature monitoring. The T-8000-1 utilizes a 4-foot non-comp
This valve weighs approximately 9.3 lbs and is constructed with union (sweat) end connections. Its maximum working pressure is rated at 630 psig, and it is designed to operate in temperatures from -20 to 77°C. The differential pressure allowance is capped at 60 psi, making it suitable for high-press
This electronic fan speed controller features a 60-inch capillary length and can start at 40% of the supply voltage. It operates within a pressure range of 320 to 410 psig and can withstand a maximum working pressure of 500 psig. This device operates effectively in temperatures from -40°C to 66°C fo
With an impressive efficiency rating exceeding 99.999% for particles measuring 0.025 microns and larger, this filter provides exceptional contaminant removal. The filter operates effectively at a nominal flow rate of 40 SCFM and supports a maximum of 50 SCFM. It is designed to handle input pressures
Weighing 4.3 lbs, this valve includes union (sweat) inlets and outlets. The valve is factory-set to open at 275 psi, with an adjustable range between 200 to 400 psi, providing flexibility based on system requirements. Designed for glycol/water media, it features a 1/4-inch SAE flare connection for p
This transducer is constructed with a brass manifold and has a maximum line pressure rating of 350 psig. Designed for unidirectional flow, it supports a response time between 30 ms and 50 ms and can operate effectively in temperatures ranging from -18°C to 80°C. With a natural frequency of 500 Hz in
The repair kit contains essential components such as a disc, seat, and diaphragm, all tailored for a valve size of 2-1/2 inches. The seat is constructed from aluminum bronze, while the disc is made from Buna-N. The diaphragm utilizes nylon-reinforced Buna-N to provide durability. This kit can be use
This fume hood controller supports an operating temperature range of 0°C to 51.7°C and relative humidity levels of 10% to 95% (non-condensing). It can measure face velocity between 0 to 200 fpm with an accuracy of ±2 fpm within specific ranges. The device features ample input and output options, inc