8985 results
This output module supports two groups of eight outputs, making it capable of managing 16 independent outputs. It functions effectively within an operating frequency range of 47 to 63 Hz, with a current draw specification of 400 mA at 5.1V and 2 mA at 24V. The module has a total backplane power of 2
This controller operates with a bus current rating of 1 Amp at 5V DC and 710 mA at 24V DC. It accommodates expansion with two Bulletin 1769 CompactLogix I/O modules and features 512 KB of user memory. Compatible components include the 1769-BA battery, 1769-ECR end cap, and 1769-RDQB door.
This removable terminal block features a wiring temperature rating exceeding 90 degrees Celsius. It allows wire sizes from 22 AWG to 14 AWG and supports up to 2 conductors per terminal. The block is rated for a screw torque of 1.36 Nm and requires a screwdriver with a maximum width of 8 mm. It is co
This module is compatible with any Bulletin 1771 I/O chassis, offering a backplane current rating of 500 mA. It supports multiple input voltage ranges, including -5 to 5V DC, 0 to 10V DC, and others, alongside input current ranges from -20 to 20 mA. Top-overvoltage ratings include 200 volts for volt
This redundant power supply module requires two units for each redundant setup. It supports input voltage classes of 120 and 240 volts AC at a frequency range of 50 to 60 Hz. A notable feature includes a maximum inrush current of 20 amps, along with a hold-up time of 2 cycles. The device maintains a
This base unit features eight standard 24V DC inputs and eight dedicated fast inputs. It has six relay outputs and includes four standard and two fast 24V DC outputs. High-speed capabilities encompass eight inputs and two outputs running at 20 kHz. It requires a power supply rating of 30 watts.
Designed to operate efficiently with an input power requirement of 190 VA at 120V AC and 230 VA at 240V AC, this power supply module allows a maximum inrush current of 45 amps. Its internal output current capabilities are 10 amps at 5V DC and 2.88 amps at 24V DC. The module includes a non-replaceabl
Designed to fit within the POINT I/O system, the 1734-FPD operates with a nominal input of 120/240V AC and 12/24V DC, with a DC input voltage range of 10 to 28.8V DC. This module is open-style and supports a maximum input current of 10 Amps, while maintaining a continuous isolation voltage of 50 vol
This module supports configurable output types, ensuring flexibility in operation. Each output has a nominal on-state voltage of 24 volts DC, with a maximum on-state voltage of 32 volts. It also provides reverse voltage protection and includes output overtemperature detection and protection per poin
This controller is designed with a total of 12 inputs, incorporating eight 120V AC inputs and four 24V AC/DC inputs. The output configuration includes eight outputs, supporting seven relay types and one 0-10V DC analog output. The module also features a total of four analog inputs that can be shared
With four non-isolated, single-ended outputs, the 1794-OE4 module is configurable for either 0 to 20 mA or 4 to 20 mA output current settings. Output voltage can be set to -10 to 10V or 0 to 10V. This unit uses a 16-bit 2's complement format and pulse width modulation for data processing. With a max
This module provides a total of 32 outputs with a maximum operating voltage of 24V DC, divided into two distinct groups of 16 outputs each. It allows for mounting on panels or DIN rails, accommodating various installation requirements. The output delay is recorded at 0.1 ms for activation and 1 ms f