Search Results
1926 results
ST-7008
GE Fanuc Emerson / RSTi PacSystem
This power module is configured with eight channels, without the use of a module ID, classifying it as a non-smart module. It comes equipped with a spring clamp terminal block and has compact dimensions of 99 mm in length, 12 mm in height, and 70 mm in width. This model does not feature internal pow
EP-125F
GE Fanuc Emerson / PACSystems RSTi-EP
This input module supports a robust connection utilizing a 1-wire interface with Type 1 and Type 3 sensors. It has a transfer rate for the system bus of 48 Mbps and includes features such as reverse polarity protection. Operating within a temperature range from -20 to 60 degrees Celsius, the EP-125F
IC755ACCBATT
GE Fanuc Emerson / Quickpanel
Functioning at a voltage rating of 3 V, the IC755ACCBATT battery holds a capacity of 620 mAh. It can operate within temperature ranges of 0°C to 40°C, and is designed to function at altitudes up to 1000 MSL. Both storage and operating humidity levels can reach up to 80% without condensation. The ter
IC693ACC335
GE Fanuc Emerson / Series 90-30
This terminal board is designed for mounting on DIN rails or panels and operates with a voltage rating of 3 V internally. It can handle overtravel input up to 30 VDC, with a wiring capacity suitable for 14 to 28 AWG. Operating conditions allow for temperatures ranging from 0 to 60 °C and storage tem
IC660EBD025
GE Fanuc Emerson / Genius I-O
The GE Fanuc IC660EBD025 electronics assembly block is manufactured by GE Fanuc Automation. It belongs to the Genius I/O series and it has two 32-circuit DC blocks rated for 12/24 Volts DC.
ST-5101
GE Fanuc Emerson / RSTi PacSystem
With a count rate of 1.5 MHz, the ST-5101 supports one 5V DC input and offers a 24V DC output ranging from 5V to 28.8V. The design includes a spring clamp terminal block connector for secure wiring. The module also has selectable input filters and consumes a maximum of 80 mA of power at 5V DC.
IC694BEM320
GE Fanuc Emerson / RX3i PacSystem
This interface module features two front 20-pin connectors compatible with RS-485/422 signal levels. It mounts onto a backplane in a single slot and has an IP20 enclosure rating. The device operates at supply voltages between 5 to 24 volts DC and has a shock resistance rating of 15G over 11 millisec
ST-3424
GE Fanuc Emerson / RSTi PacSystem
Equipped with four distinct input channels, the ST-3424 module operates within a voltage range of 0 to 10 Volts DC, featuring a 12-bit resolution that translates to 2.44 millivolts per bit. Notably, there is no isolation between channels and the data format is a 16-bit integer. The device requires a
IC630MDL310
GE Fanuc Emerson / Series Three
This module accommodates extensive logic operations with a user memory size of 4096 words (16-bit) and features up to 368 internal relays. It supports up to 128 timers or counters, as well as 128 shift or data registers. The device is programmable using relay ladder diagrams and supports up to three
IC655APU521
GE Fanuc Emerson / Series Five
Designed for point-to-point motion control, this axis positioning module supports both incremental and absolute modes of operation. It uses internal scaling to facilitate motion adjustments and can handle a maximum supply current of 500 mA. The module operates efficiently in environments ranging fro