Search Results
1928 results
IC754VBI08CTD
GE Fanuc Emerson / Quickpanel
8 in. Color-TFT with RS232/RS485 using 12 - 30 VDC
IC610MDL111
GE Fanuc Emerson / Series One
This input module supports an AC voltage range of 20-28V at 50-60 Hz and a DC input voltage of 20-28V from a source. It includes LED indicators for operational feedback and requires a single slot for installation. The module is designed for vertical mounting and weighs approximately 5 oz.
IC600BF811
GE Fanuc Emerson / Series Six
This input module operates within a power source voltage range of 10 to 50 volts DC and accepts input signals of either 0 volts (low/false) or 5 volts (high/true). The module mounts onto the Series 6 PLC backplane and is rated IP 20 for environmental protection. Its operational temperature span is f
IC655MDL526
GE Fanuc Emerson / Series Five
This input module accommodates 32 circuits divided into 4 input groups. It has an input current specification of 14.5 mA at a nominal voltage of 115 VAC and operates within a temperature spectrum of 0 to 60 °C. The terminal block features a convenient 38-point format. Its key positions are designate
IC610CCM109
GE Fanuc Emerson / Series One
This I/O expander interface module utilizes I2C for communication, supporting an 8-bit GPIO for seamless parallel I/O operations. It can tolerate input/output voltage levels up to 5.5 volts and facilitates configuration selections for high or low operation. The module's keypad function allows for co
ST-3118
GE Fanuc Emerson / RSTi PacSystem
Featuring an impressive resolution of 12 bits, the ST-3118 module performs at an update rate of 4 milliseconds per input. With its 120 Ohm input impedance, it integrates seamlessly into numerous systems. The input module consumes a maximum of 60 mA at 5V DC and connects through spring clamps on a te
IC693MDL653
GE Fanuc Emerson / Series 90-30
The IC693MDL653 input controller is a GE Fanuc programmable controller classified under Series 90-30. The IC693MDL653 controller is a 24 Volts DC positive or negative logic input controller and it comes with up to 32 input points.
IC660EBD100
GE Fanuc Emerson / Genius I-O
The GE Fanuc IC660EBD100 electronics assembly is manufactured by GE Fanuc Automation as part of the Genius I/O block series. It comes with a 93 to 132 Volts AC single-source operating voltage rating with an I/O off standby power rating of 8.5 Watts.
IC600CM542
GE Fanuc Emerson / Series Six
This memory module integrates seamlessly into existing systems, employing a rack mount method for installation. It functions optimally within temperature limits of 0 to 60 degrees Celsius and maintains performance in humidity levels from 5 to 95% without condensation. The unit is rated for installat
IC200UDR120
GE Fanuc Emerson / Versamax
This PLC module operates with 24V DC input and can handle 8 relay outputs, rated at 2 Amps each. It supports a wide AC power voltage range of 100 to 240V AC and can output voltage between 5 to 30V DC or 5 to 250V AC. Additionally, it is equipped with LED indicators.