Search Results
1926 results
ST-131F
GE Fanuc Emerson / RSTi PacSystem
This discrete I/O module includes 16 discrete input points, each sharing a common connection. Typical performance specifications include an input signal delay of 3 milliseconds and a filtering time of 1.5 milliseconds. The module features a maximum current draw of 2.5 milliamperes per point at 60 Vo
IC200UAR028
GE Fanuc Emerson / Versamax
This power supply unit operates within an AC voltage range of 100 to 240 volts. It has a power supply rating of 16 VA, with the maximum input voltage reaching 132V RMS at 50/60 Hz. The output leakage current at 240 volts AC is 15 mA, and the minimum output load is set to 10 mA.
IC600CB501
GE Fanuc Emerson / Series Six
As a logic control board, the IC600CB501 needs a power supply from the CPU, which operates at 5V DC. Current draw is rated at 0.65 amps, effectively translating to a load of 12 units. Designed for operating temperatures ranging from 32°F to 140°F, this board additionally supports storage in conditio
IC600CB500
GE Fanuc Emerson / Series Six
This arithmetic control module features 64K logic memory and requires a 5V DC power input at 1.7A, provided by the CPU power supply. Connectivity is facilitated via a 40-pin ribbon cable connector, supporting various input/output functionalities such as addressing, diagnostics, and communication. Th
IC600BF930
GE Fanuc Emerson / Series Six
This output module operates effectively at 115 Volts AC and supports four outputs. It ensures continuous isolation up to 240 Volts DC. The maximum load current for each output point reaches 4 Amps. Additionally, it has a low off-state leakage current of less than 4 milliamps, enhancing safety.
IC200UEI008
GE Fanuc Emerson / Versamax
This expansion module is geared towards enhancing the VersaMax microcontroller. It provides eight input points, each operating at 24VDC. The device is rated at 4 watts for the input power supply and provides a user power output of 200 mA to supply connected sensors. It can accommodate up to four exp
IC660EBA021
GE Fanuc Emerson / Genius I-O
The GE Fanuc IC660EBA021 Genius I/O Block Electronics Assembly is for the Genius I/O RTD (Resistive Temperature Detector) input block known as the IC66BBA021 Input Block. This I/O block has 6 analog inputs, 18 to 56 Volts DC of operating voltage, 7 Watts of power rating, and a group isolation rating
IC655PWR500
GE Fanuc Emerson / Series Five
This power supply module features jumper-selectable voltage settings. With an input current rating of 6 Amps, it operates within a frequency range of 48 to 63 Hz. The module provides a maximum load capacity of 85 volt-amperes and allows for inrush current management, with a typical inrush current of
IC600YB908
GE Fanuc Emerson / Series Six
This output module supports a maximum response time of 1 millisecond with an on-state voltage drop not exceeding 2.25 volts. The operating temperature range for the IC600YB908 is from 0 to 60°C, with a humidity tolerance spanning 5 to 95% without condensation. Its total on-state current capacity is
IC610PRG100
GE Fanuc Emerson / Series One
Designed for use with Series One PLCs, this hand-held programmer features an LCD display and an alphanumeric keypad. It allows for online programming and monitoring, supporting ladder logic programming and memory function for both RAM and EEPROM. It connects to the PLC through a 5 ft integral cable.