Search Results
1940 results
IC200UDD112
GE Fanuc Emerson / Versamax
This micro PLC supports a voltage of 12V DC for both input devices and output control. It has provisions for connecting up to 4 analog expansion units. The device features 2 analog potentiometers and includes an RJ-45 serial port for communication. Additionally, it can manage up to 4 PWM/pulse outpu
IC600BF948
GE Fanuc Emerson / Series Six
This module requires a single slot for installation and functions reliably in temperatures ranging from 0 to 60 degrees Celsius. It can store data in environments between -20 to 70 degrees Celsius. The IC600BF948 can operate at data rates between 300 and 19.2K baud and supports RS-232 and RS-422 com
IC754ACC32MEM
GE Fanuc Emerson / Quickpanel
This memory module is a 100-pin DIMM form factor and requires a voltage of 3.3V DC. It operates with a self-refresh feature and has a maximum refresh cycle time of 64 milliseconds. The buffering option is not available for this part.
EPXMBE001
GE Fanuc Emerson / PACSystems RSTi-EP
This network adapter module features dual RJ-45 copper ports and can handle an I/O data size of 2048 bytes for both input and output. It boasts a transfer speed of 100 MB/s and supports diagnostic features. The maximum bus length varies, reaching between 100 meters and 1.2 kilometers, depending on t
ST-3524
GE Fanuc Emerson / RSTi PacSystem
This module houses four channels, each capable of processing input with a resolution of 12 bits, equating to 4.8 mV per step. It offers a voltage range from -10 to 10 volts DC and operates at a fast update rate of 4 milliseconds for all channels. The module's input impedance of 500 kilohms facilitat
IC660TBA024
GE Fanuc Emerson / Genius I-O
This terminal assembly supports a block-to-block isolation rating of 1500 V RMS. It operates effectively within a temperature range of 0°C to 60°C and adapts to storage conditions from -40°C to 100°C. The relative humidity tolerances allow operation between 5% and 95%, non-condensing, making it suit
IC755CSS15CDACA
GE Fanuc Emerson / Quickpanel
The IC755CSS15CDACA terminal is a Quickpanel operator interface terminal for industrial internet applications. It has been manufactured by GE Fanuc.
ST-131F
GE Fanuc Emerson / RSTi PacSystem
This discrete I/O module includes 16 discrete input points, each sharing a common connection. Typical performance specifications include an input signal delay of 3 milliseconds and a filtering time of 1.5 milliseconds. The module features a maximum current draw of 2.5 milliamperes per point at 60 Vo
IC600YB913
GE Fanuc Emerson / Series Six
This high-density output module features 32 output points and is intended for use with GE Fanuc Series 6 PLC systems. It has an IP 20 environmental protection grade and is recommended for installation within a protective panel board equipped with climate control. The module maintains operating tempe
IC655PWR500
GE Fanuc Emerson / Series Five
This power supply module features jumper-selectable voltage settings. With an input current rating of 6 Amps, it operates within a frequency range of 48 to 63 Hz. The module provides a maximum load capacity of 85 volt-amperes and allows for inrush current management, with a typical inrush current of