Search Results
1926 results
IC697MDL671
GE Fanuc Emerson / Series 90-70
The IC697MDL671 module is an accessory part from Series 90-70 by GE Fanuc. This interrupt input module operates on 24 Volts DC voltage and it features 16 inputs in 4 groups of 4 each. The unit has an input current of 10 milliAmps and an isolation voltage of 1500 Volts.
IC600YB908
GE Fanuc Emerson / Series Six
This output module supports a maximum response time of 1 millisecond with an on-state voltage drop not exceeding 2.25 volts. The operating temperature range for the IC600YB908 is from 0 to 60°C, with a humidity tolerance spanning 5 to 95% without condensation. Its total on-state current capacity is
IC610MDL106
GE Fanuc Emerson / Series One
This input module can operate with a maximum open circuit voltage of 36 VDC and allows an input current of 16 mA per channel. The ON level voltage range is from 0 to 3 VDC, while the OFF level voltage spans from 18 to 36 VDC. It features a response time between 4 and 15 milliseconds for transitions
IC600PM503
GE Fanuc Emerson / Series Six
This I/O rack power supply operates within an input voltage range of 95 to 260 volts AC and delivers 275 load units. It features one status indicator light for monitoring operations and is suitable for indoor environments where conditions are clean, dry, and free from EMC noise. The operational temp
IC200UDD112
GE Fanuc Emerson / Versamax
This micro PLC supports a voltage of 12V DC for both input devices and output control. It has provisions for connecting up to 4 analog expansion units. The device features 2 analog potentiometers and includes an RJ-45 serial port for communication. Additionally, it can manage up to 4 PWM/pulse outpu
IC697MDL650
GE Fanuc Emerson / Series 90-70
The IC697MDL650 Positive Logic Input Module is a product of GE Fanuc and part of Series 90-70. This module comes with 32 points and has a rated voltage of 24 Volts DC.
IC200MDL631
GE Fanuc Emerson / Versamax
This discrete input module supports both positive and negative logic inputs and includes one LED indicator for each input point for local signaling. The maximum backplane current consumption is rated at 40 milliamperes, and it has a typical input impedance of 75 kilo ohms. The module exhibits a maxi
IC754VSI12MTD
GE Fanuc Emerson / Quickpanel
12 in. Mono-TFT with RS232/RS485 using 12 or 24 VDC
IC610MDL180
GE Fanuc Emerson / Series One
This relay output module operates with a 4 to 265V AC voltage range and supports line frequencies between 47 and 63 Hz. It has a peak inrush current rating of 5 A and a maximum leakage current of 1 mA. Additionally, the minimum recommended load is specified as 5 mA, with a delay time of 5 millisecon
IC697RCM711
GE Fanuc Emerson / Series 90-70
The GE Fanuc Automation IC697RCM711 communications module works as a redundancy communications module for equipment, the main unit, and the backup unit. This module comes with status indicators and a pushbutton.