Search Results
969 results
VGF32EM25
Honeywell / VGF Series
This valve, part of the VGF series, has a connection size of 2-1/2 inches and a stem travel of 3/4 inches. Its flow characteristics vary, with equal percentage behavior at Port A and linear flow at Port B. Additionally, it is rated for low leakage, adhering to ANSI Class III standards for minimal fl
MP918A1057
Honeywell / MP918
This actuator includes a built-in positive positioner to enhance control accuracy while operating at a safe pressure rating of 25 psi. It accommodates a spring range from 8 to 13 psi and has a fail-safe mode that utilizes a spring return mechanism. Its operational capabilities extend from a minimum
MP918B1014
Honeywell / MP918
Operating within a spring range of 3 to 13 psi, this damper actuator weighs 10.5 lbs. It has an air connection that accommodates a barbed fitting suitable for 1/4 inch outer diameter plastic tubing. This unit functions effectively at temperatures spanning from -40°C to 70°C and with relative humidit
MP953C1075
Honeywell / MP953
This actuator features an 8-inch diaphragm and is capable of operating under a maximum pressure of 25 psi. It has a stroke size of 8 inches and operates within a spring range of 8 to 12 psi. It accommodates different air connections with two barbed fittings, suitable for either 5/32 inch or 1/4 inch
RM7896D1027
Honeywell / 7800 Series
Rated for temperatures between -40°C and +60°C, the RM7896D1027 is designed for diverse environments. It supports an interrupted pilot type and includes a postpurge timer set to 60 seconds. The control unit has a maximum power dissipation of 10 W and accommodates a total connected load of 2000 VA.
R7851C1008
Honeywell / 7800 Series
With a flame signal output range from 0 to 5.0 volts DC, this flame amplifier boasts a response time of either 0.8 seconds or 3.0 seconds for flame failure detection. It is primarily used in commercial and industrial environments for boiler, burner, and furnace safety monitoring.
V8944N1053
Honeywell / V8944
This valve accommodates natural gas and supports operation at a pressure rating of 1/2 psi. It features a rapid opening characteristic and utilizes a straight-through, non-offset body design constructed from die-cast aluminum, which contributes to its sturdy construction. With an operating temperatu
2108N4100H
Honeywell / Searchpoint Optima Plus
The 2108N4100H gas detector features a 3/4-inch NPT threaded spigot for easy installation. It operates effectively within a temperature range of -40 to 65 degrees Celsius for both storage and operational conditions. The device supports HART communication with a 4 to 20 mA output, and it includes adv
2108N4100N
Honeywell / Searchpoint Optima Plus
This gas detector is rated IP66/67 for dust and water ingress. It functions effectively across a temperature range from -40 °C to 65 °C. The device offers an output signal of 4-20 mA and features a measuring range of 0-100% LEL, calibrated specifically for methane with a response time of less than 3
S301-IRF-R134A
Honeywell / 301EM Series
The S301-IRF-R134A operates with a measurement range of 0-1000 ppm and provides a resolution of 1 ppm. This sensor features a warm-up time of 15 minutes and has a response time (T90) of 60 seconds. It operates in temperatures from 0°C to 40°C, with humidity levels from 0 to 95% RH, non-condensing.