Search Results
969 results
RM7800G1018
Honeywell / 7800 Series
This model features a main flame establishing period adjustable to 10, 15, or 30 seconds, and can also operate intermittently. It withstands temperatures from -40°C to 60°C during operation and has a storage temperature range of -40°C to 66°C. This burner control unit can handle a maximum connected
RM7888A1027
Honeywell / 7800 Series
This burner control unit is rated for operation between temperatures of -40°C and 60°C and can be stored safely from -40°C to 66°C. It supports a maximum humidity range of 85% RH, non-condensing, and allows a total connected load of up to 2000 VA. The device features an initial pilot flame establish
RM7838C1004
Honeywell / 7800 Series
Operated at a voltage of 120 VAC, the RM7838C1004 functions effectively within temperature limits from -40°C to 60°C. It has a plug-in mounting design specifically for wiring subbases Q7800A or Q7800B. Capable of handling a maximum load of 2000 VA, this controller dissipates power up to 10 W and ope
M9484E1033
Honeywell / Modutrol IV
Designed to endure demanding environments, this motor operates efficiently with a minimum temperature of -40°C and can handle maximum ambient temperatures up to 66°C, assuming a 25% duty cycle. Users can adjust the stroke to either 90° or 160° from its factory-configured 90° position, with timing sp
R7847B1064
Honeywell / 7800 Series
This flame signal amplifier supports a wide output range of 0 to 5.0V DC and features a dynamic self-checking capability. The device operates effectively within temperature limits of -40°C to 60°C, with a storage temperature range of -40°C to 65°C. Its design includes a green enclosure and offers a
RM7897A2002
Honeywell / 7800 Series
This relay control module is utilized in on-off primary burner control applications, featuring both pre-purge and programmable post-purge capabilities. It has a pilot flame establishing period that can be set to either 4 seconds or 10 seconds. Operating temperatures are robust, spanning from -40°C t
RM7898A1018
Honeywell / 7800 Series
This relay control module weighs 1.81 lbs and functions within a minimum frequency of 50 Hz and a maximum of 60 Hz. It has the option to set the pilot flame establishing period to either 4 seconds or 10 seconds and features a selectable pilot type. The module includes an airflow switch check for sys
R7861A1034
Honeywell / 7800 Series
As part of the 7800 Series, the R7861A1034 flame signal amplifier outputs a flame signal ranging from 0 to 5.0V DC, requiring a minimum acceptable flame signal of 1.25V DC. It operates efficiently in temperatures ranging from -40°C to 60°C and is suitable for storage between -40°C and 65°C. This dev
CLSB4B
Honeywell / Micro Switch
This cable pull switch features a contact configuration consisting of one normally open (NO) and one normally closed (NC) direct-acting contact. The actuator includes a blue turn-to-reset knob, and the housing is constructed from die-cast zinc, providing durability. It offers a span length of up to
LSXA4L-1A
Honeywell / Micro Switch
This limit switch offers a side actuator type and features double-pole, double-throw (DPDT) contacts, facilitating flexible circuit configurations. It is rated for operation in environments classified under NEMA types 1, 3, 4, 4X, 6, 6P, 12, and 13, supporting a broad range of protective requirement