Search Results
966 results
M9484F1007
Honeywell / Modutrol IV
This actuator features a stroke angle range of 90° to 160°. It delivers a torque rating of 150 lb-in, with a breakaway torque of 300 lb-in for initial movement. The actuator can operate with input signals of 135 ohms and supports both 50 Hz and 60 Hz frequencies. It is equipped with two auxiliary sw
R7847B1023
Honeywell / 7800 Series
This rectification flame amplifier supports a flame failure response time of either 0.8 seconds or 1 second. It operates effectively within a voltage range of 0 to 5.0V DC and features a green-colored protective enclosure. Designed for robust performance, it can withstand exposure to relative humidi
RM7895B2013
Honeywell / 7800 Series
This relay control module features an intermittent pilot type and requires 4 to 10 seconds for pilot flame establishment. It includes dynamic checking for airflow switch validation. Its operation is supported across a temperature range of -40°C to 60°C and can be stored between -40°C and 66°C.
RM7897A2002
Honeywell / 7800 Series
This relay control module is utilized in on-off primary burner control applications, featuring both pre-purge and programmable post-purge capabilities. It has a pilot flame establishing period that can be set to either 4 seconds or 10 seconds. Operating temperatures are robust, spanning from -40°C t
M9484E1017
Honeywell / Modutrol IV
Designed to operate on a supply voltage of 24 VAC, the actuator functions effectively within a frequency range of 50 Hz to 60 Hz. It features a stroke angle adjustable from 90° to 160°, enabling versatility in its applications. Built with a die-cast magnesium housing, it is robust and reliable acros
R7861A1034
Honeywell / 7800 Series
As part of the 7800 Series, the R7861A1034 flame signal amplifier outputs a flame signal ranging from 0 to 5.0V DC, requiring a minimum acceptable flame signal of 1.25V DC. It operates efficiently in temperatures ranging from -40°C to 60°C and is suitable for storage between -40°C and 65°C. This dev
51ML2
Honeywell / Micro Switch
This limit switch operates at a voltage of 125V AC or 115V DC. It features a rated maximum current of 20 A and employs a screw terminal termination style. The device includes one normally open (N.O.) and one normally closed (N.C.) contact, allowing for versatile control options. It requires an opera
LS2H4K
Honeywell / Micro Switch
This limit switch operates effectively within an extensive temperature range of -12°C to 121°C. Constructed of stainless steel, its housing is rated IP65 through IP67, ensuring protection against dust and water ingress. The switch features a side-rotary actuator with low torque and minimal different
EX-AR471-3
Honeywell / Micro Switch
This limit switch supports a range of voltage ratings at 125, 250, and 480 VAC for alternating current, as well as 125 and 250 VDC for direct current applications. With a current capacity of 15 Amps for AC and lower ratings for DC, it has a single-pole double-throw (SPDT) configuration. Its side-rot
CLSB4B
Honeywell / Micro Switch
This cable pull switch features a contact configuration consisting of one normally open (NO) and one normally closed (NC) direct-acting contact. The actuator includes a blue turn-to-reset knob, and the housing is constructed from die-cast zinc, providing durability. It offers a span length of up to