Search Results
966 results
LP920A1013
Honeywell / Other
This remote bulb controller utilizes a 3/8 x 5 1/4 inch liquid-filled averaging sensor for temperature measurement. It operates under a pressure of 30 psi and is compatible with two piping setups. The airflow requirement for this controller is minimal at 0.011 scfm, ensuring efficient operation.
S443A1007
Honeywell / Other
This manual potentiometer has a control signal of DPDT (Double-Pole Double-Throw) and a resistance range from 0 to 135 Ohms. It is compatible with Modutrol III and Modutrol IV motors, allowing for remote manual control of Series 90 proportioning motors and relays. The device can operate in ambient t
M6415A1016
Honeywell / Other
This actuator has a weight of 3 lbs and operates at frequencies ranging from 50 Hz to 60 Hz. The fail-safe mode utilizes a spring return mechanism that rotates clockwise (CW) and has a return timing of 18 seconds. Additionally, the nominal opening timing is set at 90 seconds, ensuring accurate and e
RP920B1031
Honeywell / Other
This controller is designed for proportional pneumatic control with direct acting action. It has an output pressure span of 3 to 13 psi and accommodates a mainline pressure of 1/2 psi. Operating effectively in ambient temperatures from 5 °C to 55 °C, it is equipped with a combination 5/32 in. air co
HP970B1007
Honeywell / Other
This humidistat features a reverse acting design and is tailored for single setpoint applications. It operates with a maximum pressure of 25 psi and demonstrates airflow usage of 0.011 scfm. The operational temperature range extends from 7 °C to 52 °C, while the storage conditions support temperatur
S963B1128
Honeywell / Other
Equipped with two potentiometers, this unit features 4 test leadwires and can handle heat/cool ramp signals effectively. The device's voltage range for these signals extends from a minimum of 2V DC to a maximum of 16.6V DC. It operates properly in environments with relative humidity not exceeding 80
RP7517B1016
Honeywell / Other
This transducer features direct action control and can handle an output pressure range from 3 to 15 psi. It has a maximum operating pressure of 30 psi and consumes 1.7 vA of power. The device operates efficiently in varying humidity levels, supporting a range from 5% to 95% (non-condensing). Its air
M436A1116
Honeywell / Other
With a rated frequency of 60 Hz, this damper motor has an opening current rating of 0.37 A and a holding current rating of 0.12 A. The power consumption for opening is 28 W, while holding requires 8.5 W. It features a gray enclosure and includes a built-in thermal breaker for overload protection.
M436A1090
Honeywell / Other
This damper motor operates at a rated frequency of 60 Hz and weighs 4 lbs. It features current ratings of 0.37 A for opening and 0.12 A for holding, ensuring effective operation. The device includes a built-in thermal breaker for overload protection and achieves opening timing in 30 seconds with a c
T675A1045
Honeywell / Other
This temperature controller weighs 1.50 lbs and utilizes a 20-foot capillary tube for remote bulb placement. It offers full-load current ratings of 8.0 A at 120 V, along with locked rotor ratings of 48.0 A at the same voltage. At 240 V, the full-load current is rated at 5.1 A with a locked rotor rat