Search Results
966 results
14004137-001
Honeywell / Other
The positive positioner kit is suited for a range of pneumatic damper actuators, including the MP909E and MP909H models. It operates effectively across a temperature spectrum from -20 to 160 degrees Fahrenheit and can endure up to 80% relative humidity, non-condensing. Its operational and storage al
PP901A1004
Honeywell / Other
This pressure reducing valve is capable of managing a primary output pressure ranging from 0 to 25 psi. It supports mounting via a bracket and includes 1/4 inch NPT female connections for inlet and outlet air connections. An additional 1/8 inch NPT female port is provided for air gauge connections.
LP920A1013
Honeywell / Other
This remote bulb controller utilizes a 3/8 x 5 1/4 inch liquid-filled averaging sensor for temperature measurement. It operates under a pressure of 30 psi and is compatible with two piping setups. The airflow requirement for this controller is minimal at 0.011 scfm, ensuring efficient operation.
ML6425A3022
Honeywell / Other
This actuator generates a stem force of 600 N and is built to operate within a frequency range of 50 to 60 Hz. The actuator features a stroke length of 20 mm, ensuring efficient valve movement. Additionally, it has a fail-safe mode that positions the stem down during power failure, enhancing safety
Q5001D1026
Honeywell / Other
This valve linkage has a weight of 6.2 lbs and can exert a stem force between 160 lb to 320 lb while achieving a valve stroke lift of 1-1/2 inches. It functions in either modulating or 2-position service modes, making it suitable for diverse installation needs. The bonnet measures 1-7/8 inches in ou
S443A1007
Honeywell / Other
This manual potentiometer has a control signal of DPDT (Double-Pole Double-Throw) and a resistance range from 0 to 135 Ohms. It is compatible with Modutrol III and Modutrol IV motors, allowing for remote manual control of Series 90 proportioning motors and relays. The device can operate in ambient t
M6415A1016
Honeywell / Other
This actuator has a weight of 3 lbs and operates at frequencies ranging from 50 Hz to 60 Hz. The fail-safe mode utilizes a spring return mechanism that rotates clockwise (CW) and has a return timing of 18 seconds. Additionally, the nominal opening timing is set at 90 seconds, ensuring accurate and e
RP920B1031
Honeywell / Other
This controller is designed for proportional pneumatic control with direct acting action. It has an output pressure span of 3 to 13 psi and accommodates a mainline pressure of 1/2 psi. Operating effectively in ambient temperatures from 5 °C to 55 °C, it is equipped with a combination 5/32 in. air co
HP970B1007
Honeywell / Other
This humidistat features a reverse acting design and is tailored for single setpoint applications. It operates with a maximum pressure of 25 psi and demonstrates airflow usage of 0.011 scfm. The operational temperature range extends from 7 °C to 52 °C, while the storage conditions support temperatur
S963B1128
Honeywell / Other
Equipped with two potentiometers, this unit features 4 test leadwires and can handle heat/cool ramp signals effectively. The device's voltage range for these signals extends from a minimum of 2V DC to a maximum of 16.6V DC. It operates properly in environments with relative humidity not exceeding 80