Search Results
966 results
ML6425A3022
Honeywell / Other
This actuator generates a stem force of 600 N and is built to operate within a frequency range of 50 to 60 Hz. The actuator features a stroke length of 20 mm, ensuring efficient valve movement. Additionally, it has a fail-safe mode that positions the stem down during power failure, enhancing safety
Q5001D1026
Honeywell / Other
This valve linkage has a weight of 6.2 lbs and can exert a stem force between 160 lb to 320 lb while achieving a valve stroke lift of 1-1/2 inches. It functions in either modulating or 2-position service modes, making it suitable for diverse installation needs. The bonnet measures 1-7/8 inches in ou
S443A1007
Honeywell / Other
This manual potentiometer has a control signal of DPDT (Double-Pole Double-Throw) and a resistance range from 0 to 135 Ohms. It is compatible with Modutrol III and Modutrol IV motors, allowing for remote manual control of Series 90 proportioning motors and relays. The device can operate in ambient t
M6415A1016
Honeywell / Other
This actuator has a weight of 3 lbs and operates at frequencies ranging from 50 Hz to 60 Hz. The fail-safe mode utilizes a spring return mechanism that rotates clockwise (CW) and has a return timing of 18 seconds. Additionally, the nominal opening timing is set at 90 seconds, ensuring accurate and e
RP920B1031
Honeywell / Other
This controller is designed for proportional pneumatic control with direct acting action. It has an output pressure span of 3 to 13 psi and accommodates a mainline pressure of 1/2 psi. Operating effectively in ambient temperatures from 5 °C to 55 °C, it is equipped with a combination 5/32 in. air co
S963B1136
Honeywell / Other
Designed for compatibility, the S963B1136 works seamlessly with W973 logic panels and W975 satellite sequencers. It operates within a range of heat/cool ramp signal voltages from 2V DC to 16.6V DC, ensuring flexibility in applications requiring modulation of these signals.
HP970B1007
Honeywell / Other
This humidistat features a reverse acting design and is tailored for single setpoint applications. It operates with a maximum pressure of 25 psi and demonstrates airflow usage of 0.011 scfm. The operational temperature range extends from 7 °C to 52 °C, while the storage conditions support temperatur
S963B1128
Honeywell / Other
Equipped with two potentiometers, this unit features 4 test leadwires and can handle heat/cool ramp signals effectively. The device's voltage range for these signals extends from a minimum of 2V DC to a maximum of 16.6V DC. It operates properly in environments with relative humidity not exceeding 80
LP915A1044
Honeywell / Other
This sensor operates effectively with one pipe and has an element length of 5.6 meters. Its output pressure range spans from 3 psi to 15 psi, while the supply pressure is rated at 18 psi. The device can be used in a direct-acting capacity and consumes minimal airflow at 0.019 scfm. It provides conne
RP7517B1016
Honeywell / Other
This transducer features direct action control and can handle an output pressure range from 3 to 15 psi. It has a maximum operating pressure of 30 psi and consumes 1.7 vA of power. The device operates efficiently in varying humidity levels, supporting a range from 5% to 95% (non-condensing). Its air