Search Results
967 results
S963B1128
Honeywell / Other
Equipped with two potentiometers, this unit features 4 test leadwires and can handle heat/cool ramp signals effectively. The device's voltage range for these signals extends from a minimum of 2V DC to a maximum of 16.6V DC. It operates properly in environments with relative humidity not exceeding 80
M836A1042
Honeywell / Other
Built for efficiency, this actuator has a torque rating of 20 lb-in and features a spring return fail-safe mode. It responds to a two-position SPST control signal, allowing for precise opening with a nominal timing of 30 seconds. Suitable for foot-mounted installation, it operates effectively in tem
M436A1116
Honeywell / Other
With a rated frequency of 60 Hz, this damper motor has an opening current rating of 0.37 A and a holding current rating of 0.12 A. The power consumption for opening is 28 W, while holding requires 8.5 W. It features a gray enclosure and includes a built-in thermal breaker for overload protection.
T991A1194
Honeywell / Other
Designed with a gray enclosure, the T991A1194 incorporates an analog output connected to a 135-ohm potentiometer. It features one sensor input with a remote copper bulb element and has a 20-foot capillary tube for flexible installation. The device allows setpoint adjustments via an external knob and
M436A1090
Honeywell / Other
This damper motor operates at a rated frequency of 60 Hz and weighs 4 lbs. It features current ratings of 0.37 A for opening and 0.12 A for holding, ensuring effective operation. The device includes a built-in thermal breaker for overload protection and achieves opening timing in 30 seconds with a c
T675A1045
Honeywell / Other
This temperature controller weighs 1.50 lbs and utilizes a 20-foot capillary tube for remote bulb placement. It offers full-load current ratings of 8.0 A at 120 V, along with locked rotor ratings of 48.0 A at the same voltage. At 240 V, the full-load current is rated at 5.1 A with a locked rotor rat
M836B1033
Honeywell / Other
This damper motor operates at a rated frequency of 60 Hz and weighs 4 lbs. It features a 25-second opening and closing time, with a maximum load torque of 15 lb-in, ensuring effective dampening control.
MS4620F1203
Honeywell / Other
This model has an IP54 rating that protects it from dust and water splashes, ensuring durability. It operates efficiently within a temperature range of -40 °C to 55 °C and can be stored in conditions from -40 °C to 60 °C. The device supports relative humidity levels from 5% to 95%, further enhancing
C7061F2001
Honeywell / Other
This flame detector weighs 14.5 lbs and features a lead wire length of 96 inches for flexible installation. It is intended for flange mounting and can operate in temperatures ranging from -20 °C to 70 °C. For storage, it endures conditions as low as -50 °C and as high as 80 °C, ensuring durability a
RA890K1260
Honeywell / Other
This upgrade kit contains a control module along with necessary adapters. It operates effectively in conditions ranging from 0 to 40 degrees Celsius and can be stored within the same temperature range. It is designed for environments with up to 80% relative humidity and operates up to 1000 meters ab