159 results
Schneider Electric / TeSys
This manual starter and protector features a high interrupt rating and is compliant with IEC standards. It consists of 3 poles and is intended for surface mounting. The GV7RS220 ensures motor protection with a voltage rating of 600 V AC and current ratings between 132 and 220 A. Its mechanical durab
Schneider Electric / TeSys
Designed as a thermal overload relay, this device operates under an AC coil voltage of up to 1 kV. It ensures reliability in clean indoor environments, with a maximum allowable relative humidity of 80%, both during operation and storage. This relay is RoHS compliant and can function efficiently at a
Schneider Electric / TeSys
This motor management controller features DeviceNet communication protocol and supports various protections, including thermal overload and phase failure. It includes 6 discrete logic inputs and 3 relay outputs, with an additional relay output for signaling detected faults. The rated insulation volt
Schneider Electric / TeSys
This contactor has a rated operational current of 80 A at temperatures below 60 °C and operates on a control circuit voltage of 24 V DC. It consists of 4 normally open (NO) contacts and is rated for insulation up to 600 V, certified by CSA and UL. The LP1D65004BD has a rated impulse withstand voltag
Schneider Electric / TeSys
This motor controller incorporates 6 digital logic inputs and provides 3 normally open relay outputs along with 1 fault signal output. Rated for a nominal supply voltage of 24 V DC, it supports a supply span of 20.4 to 26.24 V DC. The device can communicate via Modbus RS-485 at various baud rates an
Schneider Electric / TeSys
This contactor consists of three poles and operates with a control circuit voltage of 230 V AC. It features a breaking capacity of 3200 Amps and withstands impulse voltages of up to 8 kV. Designed for robust performance, the unit boasts a mechanical durability of 10 million cycles and is support-mou
Schneider Electric / TeSys
Built for three-phase applications, this magnetic latching contactor functions within a frequency range of 25 to 200 Hz. It demonstrates durability with a lifecycle of 1 million cycles and operates efficiently in temperatures between -15 to 70 °C. The weight of the unit is 3.5 kg and it has dimensio
Schneider Electric / TeSys
This contactor features a configuration of 4 normally open (NO) contacts with the capacity to operate efficiently in an environmental temperature range from -5°C to +60°C. It has an insulation voltage rating of 1000 V and mounts easily to panels or DIN rails. The product adheres to multiple certific
Schneider Electric / TeSys
This contactor is designed with three poles (3P) and is certified as IEC compliant. It offers a control voltage range of 24 to 575 V AC and operates efficiently at frequencies of 50 and 60 Hz. With an insulation voltage rating of 1000 V, it can withstand a wide operating temperature range from -5°C
Schneider Electric / TeSys
This spare contact set includes all necessary components for effective installation, such as a backplate and mounting hardware. It is designed with three poles and is compatible with 3-phase systems. The contacts are made of a silver alloy for enhanced performance, and arc deflectors are incorporate