Search Results
8527 results
E1060
Mitsubishi / E1000
This module features a mechanical size of 275 x 168 x 63.3 mm and requires a cut-out size of 240 x 130 mm for installation. The device is constructed from grey powder-coated aluminium and operates efficiently with a maximum power consumption of 0.5 A. It has an internal DC fuse rated at 2.0 AT and i
MR-J2-70B
Mitsubishi / MELSERVO MR-J2
The Mitsubishi MR-J2-70B is an AC servo amplifier in the MELSERVO-J2 series. It is well-known for its high performance, dependability, and simplicity of use. It has a 750 watts rated output, a supply voltage 200V-230V AC, and a single-phase or three-phase input. It also includes a dynamic brake and
MR-J2-20A1
Mitsubishi / MELSERVO MR-J2
The Mitsubishi MR-J2-20A1 Servo Amplifier has a power supply of single-phase voltage with a 100 to 120 VAC supply at 50/60 Hz frequency, however, it can fluctuate to a range of 85 to 127 VAC. The servo output is 0.2 kW and the interface is general-purpose. The servo has an open structure with an IP0
MR-J2-100B
Mitsubishi / MELSERVO MR-J2
Product number MR-J2-100B is a servo amplifier manufactured by Mitsubishi Electric. This device was designed for robust motor control. This servo amplifier operates on a 3-phase power supply with a voltage ranging from 200 to 230 volts AC at 50/60 Hz, with a permissible voltage range of 170 to 253 v
A1SHCPU
Mitsubishi / A Series
Mitsubishi A1SHCPU is a MELSEC-A range programmable logic controller (PLC) CPU unit. It has a memory capacity of 8K steps (program) and a connection capability of 2048 x device I/O points. It is a rack-mountable backplane unit. It uses ladder diagram (LD), relay symbol language, and sequential funct
MDS-C1-CV-300
Mitsubishi / MDS Servo Drives
This drive features compact dimensions of 380 mm in height, 150 mm in width, and 255 mm in depth, with a total weight of approximately 9.5 kg. It supports 3-phase input and provides a rated output voltage between DC 270V and 311V, with an output current reaching up to 144 A.
QX82
Mitsubishi / Melsec-Q
The Mitsubishi QX82 module is a MELSEC Q series DC input module with a negative common type. It offers 64 input points and supports photocoupler isolation. The QX82 input module operates at a rated input voltage value of 24VDC (+20/-15%) with a ripple ratio within 5%. The QX82 module features an IP2
QX42
Mitsubishi / Melsec-Q
By utilizing a connector type for wiring, the Mitsubishi QX42 DC input module provides quick and reliable electrical connections. It uses very little power, only consuming about 0.075 amperes (A) of internal current. The connector-based wiring, low current consumption, and compact design of the Mits
MR-J3-40A
Mitsubishi / MELSERVO MR-J3
The Mitsubishi MR-J3-40A is a MELSERVO-J3 series servo amplifier designed to control motors. Its rated output voltage is 170 VAC (3-phase), and its rated current output is 2.8 A. The main circuit power supply voltage rating is 200 to 230VAC (3-phase or 1-phase) at 50/60Hz, with a rated current of 2.
MR-J4-350B-RJ
Mitsubishi / MELSERVO MR-J4
The MR-J4-350B-RJ, a digital AC servo amplifier, belongs to Mitsubishi Electric's MELSERVO-J4 series. Its primary purpose is to provide precise motion control for a single 3.5 kW motor in industrial settings. It supports the STO function that ensures enhanced safety during emergencies and maintenanc