833 results
FANUC / Series 20
This FANUC spindle drive PCB accommodates model numbers 0370 through 0379 and boasts optical signal isolation. Capable of operating at temperatures from 0°C to 55°C, it is also rated IP20 for ingress protection. Communication is achieved via FANUC Digital Bus, with diagnostic capabilities provided b
FANUC / Series 20
This Series 20 spindle drive control board supports inputs of 200 to 230V AC in a 3-phase setup and utilizes analog PWM for control. It features feedback acceptance through tachometers or encoders and includes protective measures such as overload and thermal trip features. Diagnostics are facilitate
FANUC / Series 20
This operator's panel is designed for panel-mount applications and features an IP20 protection rating. It operates within a temperature range of 0°C to 40°C and can withstand humidity levels up to 80% without condensation. The device is also rated for use at altitudes of up to 3,280 feet (1,000 mete
FANUC / Series 20
This relay output module is built to support relay-based output switching specifically for FANUC CNC systems. The A20B-1001-0008 module is designed for rack mounting and features two connectors for seamless integration. It operates at a voltage of 24 V DC and features visible LED status indicators.
FANUC / Series 20
As part of the FANUC Series 20, the A20B-2000-0360 module supports environments with operating and storage humidity levels of up to 80%, and can function at altitudes of up to 1000 meters above sea level. It is intended for clean indoor conditions, free from corrosive substances, and includes an RJ-
FANUC / Series 20
This memory board supports a FROM capacity of 16 MB and SRAM of 3 MB, making it effective for data storage in FANUC CNC applications. Weighing just 0.45 kg (0.99 lbs.), it operates within a temperature range from 0°C to 55°C and can be stored between -20°C and 85°C. The board is designed for environ
FANUC / Series 20
This DRAM module has a memory capacity of 4 MB and a voltage rating of 5V DC. It is designed for applications in CNC control systems, featuring a typical access time of around 70 ns. The A20B-2901-0941 employs a board-to-board connector for mounting and comes in a plug-in module form factor, compose
FANUC / Series 20
This communication board serves to link FANUC CNC systems with peripheral devices via DeviceNet protocol. Dimensions of the module approximate 38 cm in length and 5 cm in width. Designed for operation within a temperature range of 0°C to 55°C, it can endure storage temperatures from -20°C to 60°C an
FANUC / Series 20
The A20B-2200-0321 is a teach pendant circuit board featuring a liquid crystal display. It incorporates a membrane keypad with 63 function keys and provides LED indicators on the front panel for clear status monitoring. Built with a deadman switch, this circuit board ensures safety during operation.
FANUC / Series 20
This PCB for teach pendants features a 3-pole configuration with normally open (NO) contacts. Designated for panel or DIN rail mounting, it supports frequency operation at 50/60 Hz and possesses a thermal trip range of 1.0 to 1.5 times the rated current. The device is safeguarded against overcurrent