Search Results
5043 results
G6B-4BND
Omron / 3G2
This terminal relay supports a maximum switching voltage of 380 VAC and 125 VDC. Featuring four independent relay outputs, the device employs a non-latching electromechanical relay type. The rated carry current is 5A, and a coil current of 10.7 mA is specified for the 24 V model.
C200HW-PA204S
Omron / C200H
The Omron C200HW-PA204S power supply module is designed to provide the electrical power necessary for the proper operation of a programmable logic controller (PLC) system. It is part of the C200HW product line. Its supply voltage rating is 100-120 VAC or 200-240 VAC, and it supports 24 VDC output te
CS1W-ETN21
Omron / CS1
This PLC Ethernet expansion module operates on a 5 VDC power supply and consumes a maximum of 380 mA. It establishes communications using Ethernet at a data rate of 100 Mbit/s and supports TCP/IP protocol. Ideal for networking applications, it connects to the PLC backplane and uses a star topology f
MR-MG30
Omron / Other
This module utilizes a multi-drop bus topology and can connect with a maximum of 32 nodes without a repeater. When repeaters are used, this limit increases to 126 nodes. Operating with a power supply of 24 VDC, the MR-MG30 has a power consumption of 10 W and conforms to the RS-485 electrical standar
DRT2-OD32ML
Omron / DRT
Omron DRT2-OD32ML is a slave-type connector terminal device with built-in transistors and MIL terminals. It is planned to use a MIL cable to link to relay terminals. The device has 32 NPN-type output points on a single common circuit and a mounting bracket allowing DIN track or screw attachment. It
CS1W-DRM21-V1
Omron / CS1
This module supports 64 I/O points and operates on a communications power supply voltage range of 11 to 25 VDC. Its current requirement is 30 mA. The CS1W-DRM21-V1 utilizes 5-wire and 4-wire special cables for communication connections, providing flexibility in setup. The baud rate is adjustable at
NB10W-TW01B
Omron / Other
The NB10W-TW01B is an Interactive Display module manufactured by Omron. It is designed to provide an intuitive and user-friendly interface for various industrial applications. It can also use Ethernet network connectivity. And it facilitates seamless communication and data exchange between devices a
CS1W-AD081
Omron / CS1
The CS1W-AD081 analog I/O module is a special I/O module from the Omron CS series. It has 8 analog input channels. The CS1W-AD081 analog I/O module can be integrated seamlessly into Omron CS series programmable controller systems. It has photocoupler isolation between the I/O and PLC signals, but no
3G2A6-LK201-EV1
Omron / 3G2
The 3G2A6-LK201-EV1 host link unit from Omron is a flexible and powerful option for connecting an industrial host computer to its peripherals. Various computer models, such as the V1, C200H, C120, C500, C1000H, and C2000H, may be used with the CPU mounting option. Ideal for integrating and operating
R88D-WT01H
Omron / R88D
The Omron R88D-WT01H is a servo drive designed for precision motion control, operating on a 200 VAC single-phase power supply. With an output current of 0.91 Amps and offering versatile control modes such as position, speed, and torque, it incorporates essential protection functions for reliability