Search Results
5043 results
C500-AD501
Omron / C500
The C500-AD501 input module operates with optical isolation rated at 1,500 VDC between the terminal inputs and the connected PC. It supports an extensive input voltage range from 0 to ±10 VDC and current ranges from 0 to ±20 mA. With a low power consumption of 6.2 W maximum, it is designed for effic
CPM2A-20ETLCH
Omron / CPM2
Engineered for diverse applications, the CPM2A-20ETLCH input simulator supports supply voltages from 100 to 240 V AC at 50/60 Hz or 24 V DC. It maintains operational effectiveness within the 85 to 264 V AC voltage range and 20.4 to 26.4 V DC. This device offers reliable performance, with a maximum p
CS1W-OD231
Omron / CS1
This output module is designed specifically for the CS1 series, operating without any inputs. It draws 0.27 Amps for functionality, maintaining a maximum leakage current of 0.1 mA. Sinking outputs are available, with a maximum residual voltage rating of 1.5V. The module connects to the CS I/O Bus an
C200H-OD219
Omron / C200H
The C200H-OD219 Output Module, an Omron innovation, embodies compact efficiency with dimensions of 7.00" x 6.00" x 7.00". Operating at 24V DC, its 0.1A per point and 0.32A per unit current ratings facilitate robust power delivery. Designed for industrial automation, it streamlines output control, ut
CQM1H-AVB41
Omron / CQM1
The Omron CQM1H-AVB41 is equipped with four analog setting screws, each adjusting values stored as 4-digit BCD between 0000 and 0200. Located on the front panel, these variable resistors correspond to analog settings words (IR 220 to IR 223), with a small Phillips screwdriver, the setting can be adj
XW2B-34G4
Omron / Other
The XW2B-34G4 unit by Omron Automation is a connector terminal block conversion unit with 34 poles for wire connections. It features a secure screw connection option for its process side connections and a rectangular male connection option for its control side connections. The module accommodates wi
C200H-CN222
Omron / C200H
The C200H-CN222 is a sturdy 2-meter connection cable intended for smooth industrial control system connectivity. With a main unit output voltage accuracy of 10% above nominal and -15% under, paired with a minimum output current capacity of 30 mA, it provides reliable data transmission. Signal stabil
DRT2-ID16
Omron / DRT
This module has a protection rating of IP20, ensuring it is guarded against dust and solid particles. It utilizes DeviceNet communication and supports screw terminal blocks for reliable connections.
DRT1-ID161Q
Omron / DRT
This terminal features 16 digital inputs and employs terminal block wiring. It is optimized for use with PNP (sourcing) sensors and requires approximately 6 mA of current per input point. With an enclosure protection rating of IP20, the device is suited for indoor applications and is mounted on DIN
EVF8243-E
Omron / Other
This frequency inverter demonstrates a rated current of 3.9 Amperes and an output of 1.5 kilowatts. It features a 3-phase input, allowing for 50 to 60 hertz input frequencies. The unit can endure permissible voltage fluctuations between 320 and 528 volts AC and provides an alternative DC supply rang