Search Results
5043 results
3G2A5-ID111
Omron / 3G2
The 3G2A5-ID111 is a digital input unit specifically designed with programmable controllers. This component accommodates eight input points, each operating at 24 VDC. It exhibits an input current of 4 mA and an input resistance of 5 kΩ per point. Suitable for installation, it features a design for D
C500-AD501
Omron / C500
The C500-AD501 input module operates with optical isolation rated at 1,500 VDC between the terminal inputs and the connected PC. It supports an extensive input voltage range from 0 to ±10 VDC and current ranges from 0 to ±20 mA. With a low power consumption of 6.2 W maximum, it is designed for effic
CPM2A-20ETLCH
Omron / CPM2
Engineered for diverse applications, the CPM2A-20ETLCH input simulator supports supply voltages from 100 to 240 V AC at 50/60 Hz or 24 V DC. It maintains operational effectiveness within the 85 to 264 V AC voltage range and 20.4 to 26.4 V DC. This device offers reliable performance, with a maximum p
C1000H-CPU01-E
Omron / CVM1
With a total instruction capacity 174, including 12 fundamental and 162 advanced commands, the C1000H-CPU01-E is built for versatility. It allows for programming ladder logic diagrams and accommodates a data memory size of 4,096 words. The processor operates effectively between 0°C to 55°C and suppo
C2000H-CPU01
Omron / CVM1
This CPU module operates effectively within an ambient temperature range of 0 to 55 degrees Celsius and can be stored in environments from -20 to 65 degrees Celsius. It is designed for locations free from corrosive gases and tolerates humidity levels between 35 and 85%, provided they are non-condens
CQM1H-AVB41
Omron / CQM1
The Omron CQM1H-AVB41 is equipped with four analog setting screws, each adjusting values stored as 4-digit BCD between 0000 and 0200. Located on the front panel, these variable resistors correspond to analog settings words (IR 220 to IR 223), with a small Phillips screwdriver, the setting can be adj
C200H-CN222
Omron / C200H
The C200H-CN222 is a sturdy 2-meter connection cable intended for smooth industrial control system connectivity. With a main unit output voltage accuracy of 10% above nominal and -15% under, paired with a minimum output current capacity of 30 mA, it provides reliable data transmission. Signal stabil
DRT1-ID161Q
Omron / DRT
This terminal features 16 digital inputs and employs terminal block wiring. It is optimized for use with PNP (sourcing) sensors and requires approximately 6 mA of current per input point. With an enclosure protection rating of IP20, the device is suited for indoor applications and is mounted on DIN
CP1-2GO
Omron / CP1
The CP1-2GO is part of the CP1 series from Omron, featuring a CP1L CPU type. It boasts a programming capacity of 5,000 steps and a data memory capacity of 10,000 words. The device accommodates 14 I/O points with 8 inputs and 6 outputs. It also supports two axes for pulse output and high-speed counti
CP1W-TS004
Omron / CP1
Capable of handling 12 analog inputs, this thermocouple input module measures temperatures from 0 to 800°C for J type and from 0 to 1200°C for K type thermocouples. It operates with a resolution of 14 bits and maintains an accuracy of ±1°C for temperatures up to 400°C, while being accurate to ±2°C a