Search Results
5043 results
EVF8243-E
Omron / Other
This frequency inverter demonstrates a rated current of 3.9 Amperes and an output of 1.5 kilowatts. It features a 3-phase input, allowing for 50 to 60 hertz input frequencies. The unit can endure permissible voltage fluctuations between 320 and 528 volts AC and provides an alternative DC supply rang
R88M-S30030
Omron / R88M
This servo motor operates efficiently within an ambient temperature range of 0 to 55°C, making it suitable for diverse environments. It supports various operational loads, including a permitted radial load of 196 Newtons and a thrust load of 78.4 Newtons on its shaft. Additionally, it features an in
CS1W-OD231
Omron / CS1
This output module is designed specifically for the CS1 series, operating without any inputs. It draws 0.27 Amps for functionality, maintaining a maximum leakage current of 0.1 mA. Sinking outputs are available, with a maximum residual voltage rating of 1.5V. The module connects to the CS I/O Bus an
CQM1H-AVB41
Omron / CQM1
The Omron CQM1H-AVB41 is equipped with four analog setting screws, each adjusting values stored as 4-digit BCD between 0000 and 0200. Located on the front panel, these variable resistors correspond to analog settings words (IR 220 to IR 223), with a small Phillips screwdriver, the setting can be adj
XW2B-34G4
Omron / Other
The XW2B-34G4 unit by Omron Automation is a connector terminal block conversion unit with 34 poles for wire connections. It features a secure screw connection option for its process side connections and a rectangular male connection option for its control side connections. The module accommodates wi
DRT2-OD32B
Omron / DRT
This DC digital output unit operates with a supply voltage of 24 VDC, and features 32 digital outputs rated at 500mA each. The outputs are designed as NPN with negative common. It utilizes a 1-wire connection method and comes equipped with a detachable I/O connector. Communication is facilitated thr
CP1W-TS004
Omron / CP1
Capable of handling 12 analog inputs, this thermocouple input module measures temperatures from 0 to 800°C for J type and from 0 to 1200°C for K type thermocouples. It operates with a resolution of 14 bits and maintains an accuracy of ±1°C for temperatures up to 400°C, while being accurate to ±2°C a
CP1E-N30DT-D
Omron / CP1
This Omron application model CPU features 30 total I/O points, including 18 DC inputs and 12 sinking transistor outputs. It requires a DC power supply and operates effectively within a voltage range of 20.4 to 26.4 VDC. This CPU measures 8.5 cm by 13 cm by 9 cm and weighs about 0.48 kg.
C200H-CPU01-E2
Omron / C200H
This programmable controller supports a maximum power consumption of 120 VA per rack and operates efficiently within a specified voltage range. The surge current can reach approximately five times the normal current, supporting high transient loads. Offering a main control element based on MPU, CMOS
CS1D-PA207R
Omron / CS1
This power supply module provides a 5 V DC output and operates at 50 or 60 Hz input frequencies. It accommodates a wide array of units and expansion racks while ensuring system reliability through redundancy support. The CS1D-PA207R has an operating temperature span of 0 to 55°C and can be stored be