Search Results
5043 results
R88D-KT06F
Omron / R88D
This servo drive features a maximum operating speed of 2000 rpm while delivering a rated torque of 1.91 Nm. The unit is designed to function effectively across a temperature range from 0°C to 55°C and can be stored in conditions ranging from -20°C to 65°C. The drive includes an absolute-type encoder
CS1W-OD231
Omron / CS1
This output module is designed specifically for the CS1 series, operating without any inputs. It draws 0.27 Amps for functionality, maintaining a maximum leakage current of 0.1 mA. Sinking outputs are available, with a maximum residual voltage rating of 1.5V. The module connects to the CS I/O Bus an
CQM1H-AVB41
Omron / CQM1
The Omron CQM1H-AVB41 is equipped with four analog setting screws, each adjusting values stored as 4-digit BCD between 0000 and 0200. Located on the front panel, these variable resistors correspond to analog settings words (IR 220 to IR 223), with a small Phillips screwdriver, the setting can be adj
C200HW-NC113
Omron / C200H
The C200HW-NC113 module is a C200H series position control module that was manufactured by Omron and designed for industrial automation applications. It enables accurate control of a single axis in an industrial system and is compatible with stepping motor drivers and servo motor drivers that have p
CJ1W-NC133
Omron / CJ1
The CJ1W-NC133 motion control module from Omron Automation is a compact, adaptable module designed for precise motion control in industrial automation systems. It permits open-loop control of a single axis and is compatible with stepper motor drivers and servo devices with pulse-train input. With a
HMC-EP551
Omron / CVM1
This memory card acts as a module and requires the CV500 MCW01 for functionality. It is compatible with the CV500-MCW01 memory card and necessitates a memory card writer or peripheral device for proper operation.
DRT2-OD32B
Omron / DRT
This DC digital output unit operates with a supply voltage of 24 VDC, and features 32 digital outputs rated at 500mA each. The outputs are designed as NPN with negative common. It utilizes a 1-wire connection method and comes equipped with a detachable I/O connector. Communication is facilitated thr
CP1E-N30DT-D
Omron / CP1
This Omron application model CPU features 30 total I/O points, including 18 DC inputs and 12 sinking transistor outputs. It requires a DC power supply and operates effectively within a voltage range of 20.4 to 26.4 VDC. This CPU measures 8.5 cm by 13 cm by 9 cm and weighs about 0.48 kg.
C200H-CPU01-E2
Omron / C200H
This programmable controller supports a maximum power consumption of 120 VA per rack and operates efficiently within a specified voltage range. The surge current can reach approximately five times the normal current, supporting high transient loads. Offering a main control element based on MPU, CMOS
CS1D-PA207R
Omron / CS1
This power supply module provides a 5 V DC output and operates at 50 or 60 Hz input frequencies. It accommodates a wide array of units and expansion racks while ensuring system reliability through redundancy support. The CS1D-PA207R has an operating temperature span of 0 to 55°C and can be stored be